MX-3.com

I can't get my car out of first gear. The clutch seems to be disengaging properly, but the shifter will not move. Is my transmission bad?

I have the same problem with mine. It moslt happens when the car is cold. I changed my slave cylinder and it seemed to work.

thanks, I'll give that a try

Heres how to know if it your clutch, or a general idea. Turn off the car. take it out of gear. If it comes out of gear then your good to go. If not then its your tranny.

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 92RedMX3:
Heres how to know if it your clutch, or a general idea. Turn off the car. take it out of gear. If it comes out of gear then your good to go. If not then its your tranny.<hr></blockquote><p> that's what I thought. Do u know how hard the tranny is to change?

hey, i just replaced my tranny, it is not hard at all, just takes a lot of time, in a shop they say their flate rate is about 6 hours, well at the pace that i worked it took 6 hours to put in, thats with some lunch and supper breaks and soda runs, but hard no the only problems i had where getting it out the actual dropping and the actualy getting up in there to bolt in. remember TORQE IT RIGHT and take the speedo gear out of tranny and screw onto the cable, not screw cable on to gear in the tranny, if you have any questions i would love to tell you my experience with it just drop me a line at z_x71@yahoo.com