MX-3.com

wytbishop wrote:

DeadMaker wrote:Are you going to use paint gun?it's a 2k colour right?

Nope it's all rattle can...but it's expensive rattle can...like $9a can.

I miscalculated the amount of paint I would need...so it's not the result I was hoping for but I really like the black. It's very flat.





It needs another coat and you can see at the back how it's a bit shiney...That's the satin that I used last year. I like the flat a lot better. I will have to take another crack at it next weekend.

i gotta ask but i keep seeing talks of a new body? this one appears decent.... makes me nervous as mine looks the same.

I am careful not to show pictures of the rear quarters and rocker panels.

i've got rust creeping in i've gotta post some pics, its pretty ugly and i'm gonna have to make a judgment call soon.

I just didn't have the money last year to have it fixed properly and wanted to give it a go myself. I did a predictably poor job and it shows.

Big news!!!

Thanks to RobMinhas I will soon have a very nice shell to work with. I will have to store it for a while at my folks place in Calgary, but my wife and I are planning to sell our apartment and buy a house this fall or perhaps in the sping, so I will soon have my own garage and the room I need to completely disassemble the Black Beast and recreate her with a nice, rust free, straight body. I will likely pick up a nice beater to drive in the interrim while the Beast is completely dismantled and reconditioned down to the nut and bolt.

Now I just have to talk Diezzel into selling me a box of stuff to make her go faster.

Hey Charlie, I have a question... Hopefully you can answer it for me!

Do you happen to know which STB will fit over the straightneck manifold better, the MazdaSpeed or the CorkSport bar? I will need spacers either way, since I have sets of outlaw spacers for both engines...

Thanks!

the CS strut bar fits over the ZE or in your case the K8 just fine ....


Spacers?

anyway why are u asking this question in his work log

He has a MS strut bar?

Isnt the ZE manifold just as flat if not flatter then a DE mani


since im here wyt! UPDATES?!?!?!

P.S. I hate millenia manifolds

You should ask Mark (Mooneggs) he has spacers under his manifold and has used many strut tower bars over the years. I think I recall him talking about straight neck manifolds at one point as well.

I've never installed one in any of my cars so I have no idea what the clearance will be like.

No real updates. For the last while I've just been driving it. The body is truly in poor shape now and planning has begun for the recreation of the Black Beast. In the next few months I will be picking up something newer to become my daily driver and the beast will come off the road.

Once I have the space, which I should have later this year, the tear down of both the beast and the new shell I got from RobMinhas will start. I expect the recreation of the Black Beast to take a couple of years. Once that starts I will create a work log. I intend to document it very thoroughly.

My tweeked C/S bar fit with my curved neck with Outlaw spacers.

Wty, you have/did you end up picking up that 2nd Mx-3 a while while back?

Yep it's in my folks back yard under a tarp until my wife and I buy a house later this year. Our condo doesn't have a garage and it won't fit in the spare room.

wytbishop wrote:it won't fit in the spare room.

, Just because you tried!!

Hell, I would have too! I almost knocked out the wall in my shop and put in a roll-up door...

Yeah...I didn't actually try. I live on the fourth floor...in another city.

On another note...Kulluminati's big brake set up has me thinking that would be a great option for the Black Beast when the time comes so I sent them an email. They already have a bolt on option for the BA chassis 323 (which is where my spindles come from) and although they don't have an MX-3 spec in their catalogue for the rear, they say they will do one if I provide the specs.

I'm very excited to get the project started. The empIoyment situation later this year is going to take a major turn upwards and I will have more or less all the funds I want and long stretches of time off.

Hey everyone...it's been a while. I have been around here a little bit but the MX-3 has been in storage for a while now and I've been thinking about and working on other things.

In my last post ^^^ I mentioned that my employment was getting ready to take a turn for the better and it looks like next month, it finally will. That's pretty much what I've been waiting for. Once the new career is rolling, the new Black Beast build will start.

Anyway...just wanted to check in and let the community know that I'm still here.

Charlie

wytbishop wrote:Yep it's in my folks back yard under a tarp until my wife and I buy a house later this year. Our condo doesn't have a garage and it won't fit in the spare room.

hope you have some plywood sheets or a tarp under it aswell otherwise you'll be fighting rust again