Page 21 of 27

Re: JOHN'S B00STED KL updated 21/03/11 (VIDEO)

Posted: March 26th, 2011, 7:15 pm
by johnmx3ze
slim fans installed + Black intercooler!...

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Black Intercooler, just need black boots...
Image
Image
Image

Oh and heres my helper!

BOOST!!!
Image

Re: JOHN'S B00STED KL updated 21/03/11 (VIDEO)

Posted: March 26th, 2011, 10:26 pm
by Evo_Spec
johnmx3ze wrote:Black Intercooler, just need black boots...
Image
This is a wicked picture IMO :2thumbsup:
johnmx3ze wrote: Oh and heres my helper!

BOOST!!!
Image
that, is, awesome......

Re: JOHN'S B00STED KL updated 26/03/11 (slimfans + Black IC)

Posted: March 26th, 2011, 10:41 pm
by zach
really nice job!!

Re: JOHN'S B00STED KL updated 26/03/11 (slimfans + Black IC)

Posted: March 26th, 2011, 11:22 pm
by johnmx3ze
thanks guys, its always fun to get good comments when you worked hard to do something... thx!

Re: JOHN'S B00STED KL updated 26/03/11 (slimfans + Black IC)

Posted: March 28th, 2011, 12:27 am
by Sisko182
Heh. Your car looks like an angry dragon face.

Re: JOHN'S B00STED KL updated 26/03/11 (slimfans + Black IC)

Posted: March 28th, 2011, 4:37 am
by johnmx3ze
lol!

Re: JOHN'S B00STED KL updated 26/03/11 (slimfans + Black IC)

Posted: April 3rd, 2011, 5:01 pm
by johnmx3ze
This is what i call Spring cleaning!

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
ImageImage
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


after its all washed!
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 3rd, 2011, 5:37 pm
by solo_ryder
Car looks alot like mine underneath.

Nice pics, I especially like the B/W/Red engine bay pic and the fish eye under the car.

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 3rd, 2011, 6:31 pm
by johnmx3ze
looks the same underneath, is that a good thing?

ya i was just trying my new camera... still dont know 100% how it works...

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 3rd, 2011, 6:49 pm
by Daninski
Ok people we have to shut the web site down until we find a server with more storage space. John just used up the last bit of room with these pics. :P Hey John you can come down and wash my car next. :D John check your PS cooler line, the rust on it in the 8th pic down top left hand side is exactly where mine went.

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 3rd, 2011, 7:44 pm
by johnmx3ze
Daninski wrote:Ok people we have to shut the web site down until we find a server with more storage space. John just used up the last bit of room with these pics. :P Hey John you can come down and wash my car next. :D John check your PS cooler line, the rust on it in the 8th pic down top left hand side is exactly where mine went.
lol everyone loves pics!

my ps *hose* is ok dan i checked it when i installed my fans....

when it does f--- up ill swap it from the one on my parts car!

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 3rd, 2011, 8:08 pm
by Daninski
I mean the steel line where it connects to the rubber hose coming from the reservoir. Behind the clamp. Anyway it made a mess in my driveway when it went so,,,

Re: JOHN'S B00STED KL updated 03/04/11 (LOTS of PICS!)

Posted: April 4th, 2011, 8:20 am
by johnmx3ze
so here's a walkaround video... the car was not fully warmed up and i haven.'t tuned my startup and stuff, so that's why its not running top notch!

anyways here it is!

http://www.youtube.com/watch?v=11tCc7M-R2g

Re: JOHN'S B00STED KL updated 04/04/11 (pics + video)

Posted: April 14th, 2011, 5:49 pm
by johnmx3ze
new 3" ss downpipe, done by Sims here on the forum... SimsCustoms ftw!


Image
Image
Image
Image
Image
Image
Image
Image

Re: JOHN'S B00STED KL updated 14/04/11 (NEW 3" DP!)

Posted: April 14th, 2011, 7:09 pm
by Daninski
Stainless is sweet, will last forever. If he has aluminum 3" pipe he could knock off half a dozen CAI pipes. Mines stainless but for weight I'd rather go with aluminum. Do you have access to a dyno to tweek your set up?