MX-3.com

Posted: **July 28th, 2006, 4:21 am**

illapino wrote:
mx almere wrote:Someone in Germany (I think his name is Daniel) has copied the Chris Barros design and made a load of them. Hugo, a dutch guy bought one of him. That's his car in the pic. You can find more information (in German) on http://www.mx-3-community.de.
thank you for the explanation. it's great that you, someone from the netherlands, actually found my message and told me. i cannot read german however. would you know how someone from canada can get a hold of that bumper through the internet? are they selling them?

i've seen and have pictures of chris barros' car and that's a really interesting bodykit, especially the slots surrounding the rear wheels. only 2 pictures though, and the one showing the front of his car is smothered in sunglare.

Yes, he has been selling the bodykits. You can get send him an email through this link:
http://www.mx-3-community.de/profile.php?userid=980 (you might have to register to the site first)
Shipping to canada probably won't be cheap though....

Posted: **July 28th, 2006, 5:56 pm**

have to be a member unfortunately to contact him.
starting to wish i could read dutch now that you're showing me all this
that bumper and now an s2000 bumper??

amazing.
so much better than what's available here in north america!
please tell me more about other styles available in your country, almere.
u have mesmerized me

Posted: **July 29th, 2006, 11:19 am**

Reading dutch isn't that difficult, I have been doing it since I was little

I don't have much time right now, but I will post some other pics sometime.

Posted: **July 29th, 2006, 2:06 pm**

please do. i'll be waiting

Posted: **August 1st, 2006, 10:47 am**

hey

i am from germany...

mx almere is right.... this is the bumper made by DanielGSXR...

here is another pic, allready painted.....

unfortunately this isn´t my car

DanielGSXR created the S2000-Bumper, too....

he´s selling both (and some more things) but the shipping to the USA is extremly expensive....

greetz

Posted: **August 1st, 2006, 3:24 pm**

thanks alot for the info.
i've been searching "mx-3 voorbumper" on yahoo.nl and still see the millenium bumper coming up

i emailed two netherland websites about it but no reply yet.
i am really interested as i do have relatives in netherlands who - i don't know what they could do.
but i wanna find this danielGSXR...

btw, i'm in canada, not us.

Posted: **August 1st, 2006, 4:37 pm**

eehmm..

DanielGSRX isn´t from the netherlands..... he lives in germany

just write down what you want to ask... i will send it to him...

A bumper costs about 300€ ... thats about 250 USD

these are the shogun-side-skirts (and the barros bumper) made by Daniel...

Posted: **August 1st, 2006, 7:56 pm**

hi daniel. i'm more interested in the s2000 millenium bumper that i posted above. all i've seen is one picture, at one angle. what about the rear bumper and the sides? but more of the front bumper is most important... i really like it

and are any of these come in polyurethane?

Posted: **August 2nd, 2006, 3:55 am**

from the front-angle

and from upper-side

all bumper are made of GFK

greetz

edit: btw... look here

http://www.mx-3.com/phpbb2/viewtopic.php?t=44887

more pix ... and DanielGSRX is allready a member here... just write him a pm

Posted: **August 2nd, 2006, 4:45 pm**

nice.
thanks
if only it had the very sides etched like the real veilside bumper is, it would be perfect

i messaged him.
i don't think he's very active
from which website should i order it from? since i've found about three that carry it
i emailed two of them and they never replied (maybe i shouldn't have asked English only?)

MX-3.com

On Lowering and Bodykit Heighths