Page 16 of 24
					
				Re: Let's see your engine bays!!
				Posted: June 16th, 2009, 3:26 pm
				by mx-3_4evr
				I think I haven't posted my current engine bay here:
 
 
 
			
					
				Re: Let's see your engine bays!!
				Posted: June 16th, 2009, 5:11 pm
				by wytbishop
				You almost have room for another one in there.
			 
			
					
				Re: Let's see your engine bays!!
				Posted: June 16th, 2009, 6:14 pm
				by 93vtecklr
				Here's the Datsun's engine bay, tuckin 18" 100 spokes!!!  Those are S-10 Air Ride Technologies control arms, Chassis Tech drop spindles, did the 5 lug swap for disc brakes.  It's an old pic but I don't have any completed pics until the frame is pulled and powdercoated.
 
Here's the Willy's engine bay, that's what 425 Corvette HP looks like!!!

 
			
					
				Re: Let's see your engine bays!!
				Posted: June 18th, 2009, 9:47 am
				by hppwdn
				solo_ryder wrote:Ppl don't really wrap headers for 4  reasons:
I high temp ceramic painted mine.  It looks a lot cleaner when it's done.  And now my turbo blanket matches my primaries and downpipe.   

 
			
					
				Re: Let's see your engine bays!!
				Posted: June 18th, 2009, 10:01 am
				by solo_ryder
				hppwdn wrote:solo_ryder wrote:Ppl don't really wrap headers for 4  reasons:
I high temp ceramic painted mine.  It looks a lot cleaner when it's done.  And now my turbo blanket matches my primaries and downpipe.   

 
Word. I managed to find a set of 5th gen hotshot headers for my car as well. Ceramic coating ftw
 
			
					
				Re: Let's see your engine bays!!
				Posted: June 18th, 2009, 11:27 am
				by mx-3_4evr
				I have ceramic coating under the heat wrap 

 
			
					
				Re: Let's see your engine bays!!
				Posted: August 1st, 2009, 9:13 pm
				by 94drumx3
				mx-3_4evr wrote:I think I haven't posted my current engine bay here:
 
 
 
Youuu are soooOOOo Beautiful.....to MEEEeeEE! Cant you see!
 
			
					
				Re: Let's see your engine bays!!
				Posted: August 3rd, 2009, 1:37 am
				by johnmx3ze
				
			 
			
					
				Re: Let's see your engine bays!!
				Posted: September 17th, 2009, 8:58 am
				by NavyFCCIWS
				Hey guys its been a while since i been on here and i forgot my other account password. Im going to iraq but plan on getting another mx when i get back. Heres my old mx3 engine bay. Ive had 2 mx3s before. 1 was all stock then my white one was all show. My next endeavour will be clean and all go. 

 
			
					
				Re: Let's see your engine bays!!
				Posted: September 18th, 2009, 2:20 pm
				by timpronk
				Stay safe over there mister!
			 
			
					
				Re: Let's see your engine bays!!
				Posted: October 19th, 2009, 9:28 pm
				by nobodyhere671
				Not done or clean but eh 
 

 
			
					
				Re: Let's see your engine bays!!
				Posted: October 19th, 2009, 9:35 pm
				by mx-3_4evr
				^ Nice! What exhaust manifold is that? What radiator are you using?
			 
			
					
				Re: Let's see your engine bays!!
				Posted: October 19th, 2009, 10:02 pm
				by nobodyhere671
				I took the ebay header, made all the welds thicker, welded another pipe on for the wastegate, cut the t25 flange off and welded the t3 on.  And i hate to say it but its a civic radiator lol   couldn't fit the long mx3 one in due to it interfering with the turbocharger.
			 
			
					
				Re: Let's see your engine bays!!
				Posted: October 19th, 2009, 10:37 pm
				by mx-3_4evr
				lol nice! Is that a T04E? I saw your vB gallery over at clubprotege.com I think 

 
			
					
				Re: Let's see your engine bays!!
				Posted: October 20th, 2009, 6:21 am
				by nobodyhere671
				It's a 57 trim T3/T4 .60 cold side .48 hotside. i'm not sure what vB means lol,  but these are the first pictures i've posted of the bay so i'd assume it was probably someone else.