Page 2 of 2
Re: Bouncing/low idle with KL31/36
Posted: August 31st, 2011, 5:44 pm
by MrMazda92
Try adjusting your TPS(Throttle Positioning Sensor) and throttle stop screw.
Re: Bouncing/low idle with KL31/36
Posted: January 8th, 2013, 5:54 pm
by sinix3
i realise this is a very dead thread but i have a quick question. i swapped a klze into my mx3(92) and it runs fine(but rich) on the k8 ecu and je 50 vaf. but i got a chipped ecu out of the car i pulled my engine from and the kl02 vaf. now that i swapped it into my car the idle is extremly low and no matter how i adjust the idle screw it doesnt bring the idle up. im thinking that i need to adjust the tps but im not sure. any help is awesome.