MX-3.com

ahhh i gotcha! my tranny needs a nice little bath, but im to lazy. i just want my car on the road! lol.

Haha yaa I miss my car lol I hate public transit

so i've been doing some polishing and buffing so here take a look
before

after

before

after

before washing

after washing

Sorry I haven't been able to post any pics lately my internet is down and all I have been able to use is my cell

Nice job on the polishing. It looks like you took your time with it.

Thanks yaa I did

Shinyyyyy

Smooth

Make sure the surfaces around and between the cylinders are a very fine finish. Blown head gaskets start with a capillary leak.

So to get around the wirring issue from the atx to mtx swap could I just use a wirring harrness from a mx3 that already has a mtx

yes, but thats even more complicated than splicing a few wires.

Ok lol would the the side trany mount from a 94 4 cyl work or is the trany completely diff

all mx-3 ones are the same

Ok thanks

i just took my atx wiring harness part and zip tied it into a bunch then stuffed it down in the hole by the fender behind the head light, you only need 1 plug off it, for the rad im pretty sure..