Page 2 of 2
Re: [GI] Carbon lips
Posted: June 25th, 2010, 11:03 pm
by Sleeper6
Mooneggs wrote:I have a CF front lip and it is 2 pieces... I would definatley recommend making it 2 pieces similar to the OEM design. It will give it a heck of a lot better chance of not breaking while shipping!
any chance of a close up pic?
Re: [GI] Carbon lips
Posted: June 27th, 2010, 5:35 pm
by AaronTietje
Mooneggs wrote:I have a CF front lip and it is 2 pieces... I would definatley recommend making it 2 pieces similar to the OEM design. It will give it a heck of a lot better chance of not breaking while shipping!
Thats a good point. Thanks.
Update I just got fiberglass for the backing. It is a very good boat grade weave.
Re: [GI] Carbon lips
Posted: August 10th, 2010, 10:34 am
by AaronTietje
Hi again guys and gals, just an update. I am still looking for a front lip
Once I have that I will begin the mold work.
Thanks Aaron
Re: [GI] Carbon lips
Posted: February 9th, 2011, 1:29 pm
by pattheriault
are you still planning on doing this lip?
Re: [GI] Carbon lips
Posted: February 9th, 2011, 2:31 pm
by Sleeper6
Pretty sure he is, theres just a shortage of lips in upstate...
Re: [GI] Carbon lips
Posted: February 9th, 2011, 11:04 pm
by AaronTietje
I am still planning on doing this, however, I only have a busted up lip in my posession.
If I don't find a good lip I will have to repair mine an make the mold from it.
Re: [GI] Carbon lips
Posted: February 11th, 2011, 11:43 am
by pattheriault
id send you one but I dont have any lol!
would def. be interested in a carbon one if this work out.
Re: [GI] Carbon lips
Posted: February 13th, 2011, 4:24 pm
by AaronTietje
pattheriault wrote:id send you one but I dont have any lol!
would def. be interested in a carbon one if this work out.
LoL thanks buddy.
Re: [GI] Carbon lips
Posted: February 14th, 2011, 5:59 pm
by PATDIESEL
ugh, I am still interested too. Post a thread asking for cheap lip pieces on MOCA.
www.atlantamx3.com/mocaforum I think we might have two decent sides if we (MOCA) put two together. I know I have a ok one that I was saving for just such a molding process, but I am too busy.
Re: [GI] Carbon lips
Posted: February 26th, 2011, 6:34 pm
by RedAutobotMX3
Def would love one of these +1
Re: [GI] Carbon lips
Posted: March 20th, 2011, 11:28 am
by FastFlaMx3
i would love to have one too
Re: [GI] Carbon lips
Posted: September 6th, 2011, 12:51 am
by MrMazda92
Nobody load your guns over this, but....
J-Spec mini sides.
I would rock a JDM lip if the sideskirts weren't full length. I think this would be the sexiest look ever for an MX-3.
It couldn't be too hard to mock one up either, using Euro mini sides and JDM full lengths to design it.
Re: [GI] Carbon lips
Posted: September 9th, 2011, 9:23 am
by ethand
I think the user -eunos- has a mold for the JDM lip... He was going to do a run of them... He's selling his Eunos now, though, so might not be too keen. Also, he's here in Australia (but on the other side to me!), so postage might be a bit...
Still, might be worth shooting him a PM...
Re: [GI] Carbon lips
Posted: September 9th, 2011, 10:22 am
by Sleeper6
Winters coming soon So we might be able to talk aaron into making some copies of my lip when its off for the season, its a bit more aggresive but if theres interest Ild be willing to let him make molds of it.
Re: [GI] Carbon lips
Posted: September 10th, 2011, 3:08 pm
by MrMazda92
There's a GS lip for sale in the [FS] section right now, $80.