Page 2 of 2
Re: De/Ze-T mx3 VIDEOS
Posted: July 9th, 2008, 4:40 pm
by slinkymx3
that looks like a t3 on the left .. the number of blades is the same its the pitch that matters... the lower the number the quicker the spool.IIRC n yes a freer flowing exhaust will lower the spool time ...a stock exhaust to a full 3 will lower by 1k rpms no doubt
Re: De/Ze-T mx3 VIDEOS
Posted: July 9th, 2008, 4:44 pm
by mazdanut08
Well my turbo is the one on the right in that pic, also have another question the nipple on top of the wastegate should there be a vacuum line to that if i dont have a boost controller?
Re: De/Ze-T mx3 VIDEOS
Posted: July 18th, 2008, 7:43 pm
by slinkymx3
i think i just ran across a page with ur car.. u dynoed a 299whp?? and ur asking me questions...lol
Re: De/Ze-T mx3 VIDEOS
Posted: July 20th, 2008, 3:32 pm
by mazdanut08
Yes, I am very new to the forced induction world.
Re: De/Ze-T mx3 VIDEOS
Posted: July 30th, 2008, 9:56 am
by slinkymx3
well im not sure search for ur answer.... for everyone following up on the turbo project! i ran a 14.2 @100mph and a 2.2 60ft still had no traction. spun off the line still hit a okay 60 but 3rd gear just spinning...looking into mil s injectors upping the boost and hit the real low 13's buying tires!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11