Posted: November 26th, 2007, 8:49 pm
well it defiantly has nothing to do with the slave cylinder since I just replaced that.
it's not because it's new that it actually works great
did you bleed it corectly?
MX-3.com
The Worlds First and Largest Mazda MX-3 Forums
https://www.mx-3.com/phpbb3/
Tranny or clutch problem, a big one
Page 2 of 2
Posted: November 27th, 2007, 12:56 am
Posted: November 27th, 2007, 12:39 pm
sometimes the problem is in the master cylinder...The General wrote:well it defiantly has nothing to do with the slave cylinder since I just replaced that.
Posted: November 27th, 2007, 4:00 pm
well the clutch wouldnt bleed and we tried every way we ever heard of, but nothing worked and it could be in the master cylinder also
Posted: November 27th, 2007, 7:50 pm
well if you couldnt bleed the system thats because either you have an air leak, or one of the piping is blocked. But since you said that you have no pedal i bet that you have a leak some where. Have a look at your master cylinder right where the pedal enters. If there is brake fluid leaking from it then you need a new master cylinder.