Page 2 of 2
Posted: June 17th, 2006, 12:42 am
by Bling Bling
I guess I'll reconsider the height. But right now not sure how to put in my signals in the front. I was considering trying to use my stock ones and make a bracket to hold them. The question is where and how stable they will be.
Posted: June 17th, 2006, 9:16 am
by Jutzi420
I've had clear front signals along with some piaa super whites for a long while, I've never been overly happy with the light output from them though, they're a little iffy to see from a distance during the daytime hours. The same bulbs perform amazingly in my altezzas tho.
If and/or when I get a drift front I think I'd have to find some clear signals that didn't have a fluted lense, and mount them in behind the mesh.
Posted: June 17th, 2006, 2:29 pm
by Bling Bling
That's what I thought too but the question is how?
Posted: June 18th, 2006, 5:00 am
by Jutzi420
Bling Bling wrote:That's what I thought too but the question is how?
That's a good question, I can't really say until I try. I was thinking that these 90-91 CRX turn signals might be the most suitable.
http://www.eautoworks.com/html/ORD-1-1-1-22595.cfm
There's also a pretty big list of possible lenses here:
http://www.eautoworks.com/html/ast-Auto ... r~Lamp.htm
I would probably start by trying to make a bracket out of some scrap plastic or maybe some large metal corner braces and archor it to the bottom side ot the real bumper.