Page 2 of 2
Posted: May 30th, 2005, 8:46 pm
by jschrauwen
neutral wrote:According to the Mazda Electronic Parts Catalogue (Europe Version) the exact part name is "Garnish, Lift Gate" (there's lots of other irrelevant little bits in the MEPC called "garnish" too) and part # is EA01-50-810B. Might be worth lurking on ebay as these items come up regularly for low cost or post a WTB on the BB. Mazda will want your left nut and beaucoup $$ for a new one from them.
Jim, pm sent reference this post
Posted: June 7th, 2005, 5:23 pm
by garfy1981
Got an email back from pakfifer, there is no uk distributor for that spoiler, its a unfortunate case of pay the shipping costs
Posted: August 14th, 2005, 5:20 pm
by garfy1981
Good news, ive spoke to a guy in manchester and he is getting the moulds to make a high level spoiler and garnish similar to the mazdaspeed spoiler for the mx-3 the guide price he has given me is £150
primered and delivered. At the moment i cant revel his email address until every thing is off the ground. But sounds promising. His expecting to get the moulds in about 2-3 weeks.
Posted: August 15th, 2005, 1:35 am
by mx almere
If that doesn't work, try
http://www.jeroentje.nl. Shipping from holland cannot be that much either.
Posted: August 31st, 2005, 4:46 pm
by garfy1981
The guy from manchester has emailed us to confirm that he has the moulds to make the mazdaspeed style spoiler. He is also buying moulds to make 2 or 3 bodykits for the mx-3. A plus for the uk that finally more bodykits without the high shipping costs !
If you email gary lee at
imexdesigns@yahoo.co.uk he can forward pictures of the bodykits and future mx-3 kits. also include that you are from mx-3.com.
Im nothing to do with seller, only that ive been in constant contact providing him existing body kit designs from corksport, psi tuning, pakfifer etc.
Posted: September 4th, 2005, 5:22 am
by garfy1981
Forgot to mention he has also agreed to give 15% off to club members. Just email username and mention mx-3.com