Page 2 of 2
Re: The mx is FINISHED!
Posted: May 28th, 2004, 1:27 pm
by Franko
The name of the guy on ebay is "japanese_performance_engines" The guys actual name is moe. They are located in ontario I believe and the shipping was $100 US..
You can look at the motors he has at
this address
Re: The mx is FINISHED!
Posted: May 31st, 2004, 3:44 pm
by Garrendun
could you give us a list of the cost's of things like the engine and intstall, ect?
Re: The mx is FINISHED!
Posted: June 1st, 2004, 10:56 pm
by Franko
engine was like 1200, gearbox was about 500, the cv axels were 100, apexi safc 2 was 400, all the piping for the intercooler was a suprising 160ish, the intercooler was 150 and I had to change the end tanks so that was only like 75. Ohh and a blow off valve that was about 200, then there were mounts and some other stuff like gauges and all that.. but I would say it was a few thousand to buy everything.. and the install was 1000 even.. so I did allright with it.
Posted: January 12th, 2005, 3:45 pm
by valenzul
what kind of intercooler do you have?
Posted: January 12th, 2005, 7:22 pm
by TEAMpK
The BOV too..makes me giddy. I have a stock Eclipse BOV on it right now and it sounded ok...but now I got the Blitz SS and it will be on in like a month when my new B6T gets here and installed. Turbo = good times.
Posted: January 13th, 2005, 12:39 pm
by Mx6lsT
what are your fuel upgrades
do you have a klo3 running at 10psi stock internals?
Posted: January 13th, 2005, 9:39 pm
by papa roached
no thats a BPT