S-AFC

[Manach]

Originally posted by maldo:
Again, pick up the appropriate pages for this project. I am not responsible for your screw up..

Thanks for the information Maldo!

[mx3TT]

OK so here is what I have...

Red Wire - 1B - White/Red Stripe
Green Wire - 2E - White
Gray Wire - 2L - Lt. Green/White Stripe
Brown Wire - 2C - Black/Lt. Green Stripe(Closer to ECU)
Black Wire - 2C - Black/Lt. Green Stripe(Further from ECU)
Yellow Wire - 2O - Red(Wire coming off connector)
White Wire - 2O - Red(Wire coming from harness)
Blue Wire - 2N - Red/Blue stripe

[maldo]

Go to your "Sensor Check" menu and you should be able to view your O2 sensor's voltage, it is the 3rd one down the list (I think).

[mx3TT]

I cant start my car ( no tranny ) so I dont think it will pick up anything yet.

[maldo]

Don't think so. Use the online manual, you will need to reference pages F1-151 through to F1-158. That is all that I used for the S-AFC and everything else for my car....online manual is DOHC, I sourced mine through my dealer.