Power Folding mirror removal
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Power Folding mirror removal
Does anyone know what all do i need when removing the folding mirrors out of a eunos presso? I got the mirrors and switch but i cant find the relay anywhere. Do i really need to take out the dash or could i remove it without doing so.
Last edited by kulluminati777 on October 13th, 2012, 1:12 pm, edited 1 time in total.
Re: Folding mirror removal
I don't think the mirrors would need a relay. I don't recall seeing one, but if so equipped, you'd shouldn't have to remove the dash to remove it.
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Folding mirror removal
I remeber seeing folding mirrors for sale somewhere on google and it had the relay that looked like the flasher relay but it was a blue box instead of grey and said folding mirrors on it. I dont think it was for a presso. It was for a 323 or some other mazda. I already removed the switch and mirrors but i would think there is more somewhere im missing. I hope not because i soon wont have the presso any more so i wont be able to grab anything else later



Re: Folding mirror removal
No more Presso?
Are these standard mirrors? or power-folding mirrors? I get the feeling I'm missing or over-looking something here...

Are these standard mirrors? or power-folding mirrors? I get the feeling I'm missing or over-looking something here...
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Folding mirror removal
power folding mirrors you flick a switch and they fold in automatically sorry i didnt say the power part lol
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Power Folding mirror removal
Yes there should be a relay under the dash, just follow the wires
Although I didn't use relays when I installed mine

Although I didn't use relays when I installed mine

My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

Re: Power Folding mirror removal
I was missing something! wow, now there's another item on my 'want' list...
93 GS, ATX to MTX swap, chrome 16x7, upper strut bars, SRD LCA bushings.
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
Upcoming improvements: Tokico/Eibach struts/springs, energy suspension LCA bushings
94 RS MTX, Engine swap completed, ALIVE Again!
95 RS ATX, parts car/project X
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Power Folding mirror removal
Mooneggs wrote:Yes there should be a relay under the dash, just follow the wires![]()
Although I didn't use relays when I installed mine
oh man, if you didnt have to use relay cool but the wires from the switch doesnt go to the usual fuse box area like you would think it goes all up into the HVAC area and i wold have to take the dash out to get there. But if you didnt use the relay cool they should work with out them.
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: Power Folding mirror removal
hmmm that's interesting. It almost sounds like they were put on aftermarket then or something. Those 2 wires are probably going straight to the mirror on the other side of the car for the folding function. That's how I ran mine...
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Power Folding mirror removal
could be the case but i remember seeing a blue box on someone elses folding mirror set up BUT im sure if yours are good mine will be too thanks alot



- MrMazda92
- Supporting Member
- Posts: 5202
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Power Folding mirror removal
Do the lock cylinders illuminate when you touch the handle? If so, Dibbs 

Daily:
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Power Folding mirror removal
MrMazda92 wrote:Do the lock cylinders illuminate when you touch the handle? If so, Dibbs
I didnt even look but i dont think so. I will check when i go get the car from the local military sale lot down the street because i have to still get a few thing from the car.
- MrMazda92
- Supporting Member
- Posts: 5202
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Power Folding mirror removal
Alright! Haha, I keep forgetting there are so many cool things that the Presso MIGHT have, and the list is pretty long... How about the trunk speakers, are the panels on the sides full length, or flap style?
Daily:
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
- kulluminati777
- Senior Member
- Posts: 2509
- Joined: July 11th, 2010, 11:10 am
- antispam: ~SPAM*SUX~
- Location: Sunny California
- Contact:
Re: Power Folding mirror removal
MrMazda92 wrote:Alright! Haha, I keep forgetting there are so many cool things that the Presso MIGHT have, and the list is pretty long... How about the trunk speakers, are the panels on the sides full length, or flap style?
No it has the flaps. Yeah when i first was in the car i was amazed at how different it is then a MX3. It seems like your in a "up scale" MX3 lol I really wish i could keep it
- MrMazda92
- Supporting Member
- Posts: 5202
- Joined: October 8th, 2009, 5:35 pm
- antispam: No
- Location: Midwest
Re: Power Folding mirror removal
Eventually you'll get one!
Daily:
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc
'12 Challenger R/T + STP - Magnuson 2650 blower (7 PSI), Skip-Shift/CDV deleted, StopTech ST60 front brakes, Hellcat rear Cradle/Brakes, 2 piece DS. 6 speed, 3.9 LSD, 18" wheels - 510 WHP
Kid Hauler:
'08 Suburban LT 4WD - TVS 1900 Blower, LF SC Cam, headers, AFM delete, true 5" lift, 33x12s, 523 WHP
First Love:
'92 GS 5 spd - Straightneck KL/67mm TB, MegaSquirt/Coilpacks, 5 lugs/Speed6 brakes/FD wheels, wiretuck, coilovers, headers, AEM WB, Borla
Deleted: VAF/Power Steering/Air Conditioning/EGR/ABS/Auto Seatbelts/etc