MX-3 parting out
MX-3 parting out
OK just yesterday I got side swipped on the DVP (highway) some chick driving a 88 dodge shadow, sent me into the guard rail (she scratched her front bumber) My car is damaged beyond Insurance repair.
92Mx-3 GS 5-speed Im wanting to know if very many people would be interested in parts (car could be fixed) whats damaged- all front end cosmetics (hood fenders ect)
Car has new exhaust (high flow cat, flowmaster) short shifter, strut brace, custom rear two 10" sub box moulded to fit spare tire canaster. Tinted windows/hatch, Interior is customized in Blue/black/red vinyl. Engine and tranny are strong but high K 260k engine burns 1 litre per 5000k
If people are interested I will buy the car back from Insurance when time comes if not then all my hard work is gone, also If anyone wants the entire car let me know (it still drives no damage past the body)
92Mx-3 GS 5-speed Im wanting to know if very many people would be interested in parts (car could be fixed) whats damaged- all front end cosmetics (hood fenders ect)
Car has new exhaust (high flow cat, flowmaster) short shifter, strut brace, custom rear two 10" sub box moulded to fit spare tire canaster. Tinted windows/hatch, Interior is customized in Blue/black/red vinyl. Engine and tranny are strong but high K 260k engine burns 1 litre per 5000k
If people are interested I will buy the car back from Insurance when time comes if not then all my hard work is gone, also If anyone wants the entire car let me know (it still drives no damage past the body)
Re: MX-3 parting out
get some pics of the Interior
and what kind of short shifter is it
and what kind of short shifter is it
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
Re: MX-3 parting out
hey if u got any clear lights or the short shifter for sell i wanna buy it email me at stevenuishere@hotmail.com
Re: MX-3 parting out
im interested in the rear spoiler. which one is it?
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: MX-3 parting out
i would be intersted in the cylinders holding the hatch up
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
Re: MX-3 parting out
Steeb thanx, I am emotionaly destressed though (you get first dibs)
Just wanted to remind everyone that Im still deciding to keep the car or let INS keep it, Doesnt look like a hard car to part out though.
Short shifter- Pace setter adjustable.
I also have some racing belts that where custom made for myself (so a medium build 32"-34" waist) little hard to get into since they buckle only once (in factory buckle) but even if never used they look cool just being there.
Just wanted to remind everyone that Im still deciding to keep the car or let INS keep it, Doesnt look like a hard car to part out though.
Short shifter- Pace setter adjustable.
I also have some racing belts that where custom made for myself (so a medium build 32"-34" waist) little hard to get into since they buckle only once (in factory buckle) but even if never used they look cool just being there.
Re: MX-3 parting out
hey can i get your rear quarter panels both sides how much shipped to 72764
Re: MX-3 parting out
Is your stereo consule available. My stereo was stolen and the bastard destroyed that entire area so I need to replace everything below the A/C control, drop me an email if you want to sell that, thanks!
-
- Junior Member
- Posts: 18
- Joined: July 4th, 2003, 2:01 am
- Location: pownal vermont usa
Re: MX-3 parting out
hey man that sux about your car, i need the ring that holds up the shifter mine broke and i cant find one anywhere, ive been looijgn for 6 months, i have a piece of wood restign on my exhaust to hold it up but its a pain, i could also use the springs i need all 4 of them the kid that had the car before me cut 4 inches off of them so it rides liek a rock, let me knwo how much and how much it would be to ship to vermont,USA. email me jjennings153@hotmail.com
thanx. [email]jjennings153@hotmail.com" target="_blank[/email] jeff
thanx. [email]jjennings153@hotmail.com" target="_blank[/email] jeff
-
- Supporting Member
- Posts: 244
- Joined: December 2nd, 2002, 2:01 am
- Location: Kalamazoo, MI
- Contact:
Re: MX-3 parting out
If possible there are a few parts I need for my gs and I was wondering if you have them for a good price. I need the little tinted plastic bezels from inside the gauge cluster. The ones that cover parking brake light and the seatbelt lights from each side of the cluster. Also if you still have it available I would like to buy your hi-flow cat from you. How much for the rest of the exhaust since I currently have a flowmaster. What size is the exhaust piping. I'm also interested in your strut brace and possibly your short shifter. Toss me an email at Piranhapro@chartermi.net or AIM: Projekmx3
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
-
- Regular Member
- Posts: 369
- Joined: September 16th, 2002, 2:01 am
- Location: minnesota
Re: MX-3 parting out
hi im very interested in your subwoofer enclosure , how much are you looking for it? how much does it weigh? email me back your reply thx
sold the mx-3 , bought 04 gtp comp g , from the smallest v6 to one of the biggest 3800 s/c FTW
Re: MX-3 parting out
You wouldn't happen to have interior carpet or rear seat for sale?
Re: MX-3 parting out
OK I bought another 92MX-3 5-speed and all (Im right back where I started only this thing is stock) SO I will be keeping must upgrades (shifter exhuast ect) Still sellig tones of stuff and its going fast. Im not big on shipping but I will have to do so since its a big part of todays online market (My prices will not include shipping since I have no idea how much it cost and everyone is scatered across america).
Everyone Interested should E-mail me ENDOCYC@HOTMAIL.COM
The subwoofer encosure seems to be a hot item Send me an E-mail and I will reply with a pic.
This new MX-3 I found I just couldnt pass up, It had 250,000k (sure thats high) but this guy owned the car since 1993 and has taken amazing care of it, only the body suffers from things like a ****ty car wash (scratched) and the clear coat on the hood is flaking. But this is one of the few MX-3 I know of that still legaly passes emissions and the valve cams dont clank on start up. anyways thanx for listening.
Everyone Interested should E-mail me ENDOCYC@HOTMAIL.COM
The subwoofer encosure seems to be a hot item Send me an E-mail and I will reply with a pic.
This new MX-3 I found I just couldnt pass up, It had 250,000k (sure thats high) but this guy owned the car since 1993 and has taken amazing care of it, only the body suffers from things like a ****ty car wash (scratched) and the clear coat on the hood is flaking. But this is one of the few MX-3 I know of that still legaly passes emissions and the valve cams dont clank on start up. anyways thanx for listening.