Hum, a funny tranny problem

A forum for discussions regarding the MX-3' transmission. Swap, technical, and troubleshooting info should be placed here.
Post Reply
User avatar
MAPEXMX3
Regular Member
Posts: 33
Joined: April 13th, 2006, 1:03 pm
Location: CANADA/QUEBEC

Hum, a funny tranny problem

Post by MAPEXMX3 »

So hy there mx-3 fan,
short story bettre, year a go, swap for a bp for a pro lx (gt) engine,tranny,ecu,the complit swap, first year, tranny what hard to pull in second gear...the last onwer of the pro was a young men with a fast and furiuos attitude, so i fought, i just kick the s**t of the car, the second syncro dead...
so wait to winter (my baby do not ride in snow anymore) take out the tranny...a rebuilter change the syncro. and the gear...
but evrething back on..but now...oh bizzar..when a start evryting run good, after a few klic, the second gear and the fourth starting to get hard to pull in...and after i ride on the higtway,the second gear is totaly not cooperative, and the fourth grinding...
What th f**k happing here, my second gear make me loss a big 2-4 second before got in. the 1-3 and 5 gear goes find...and in the morning...the tranny run like a new one, no grinding or hard shift,
what could it be, the oil..hum a be suprise,it will but afecting all the gear, i thought, the shifter rod,a keep my mx-3 rod..but..a the morning, tranny goes find...
anybody got a clue...
User avatar
_-Night-Shade-_
Senior Member
Posts: 2664
Joined: January 15th, 2009, 8:00 pm
Location: Toronto, Ontario, Canada

Re: Hum, a funny tranny problem

Post by _-Night-Shade-_ »

MAPEXMX3 wrote:What th f**k happing here
:lol: No disrespect but that's like the only thing I understood from the whole paragraph.
--------------------------------------------
[WORKLOG] [FOR SALE] [Wishlist] [Feedback]
User avatar
93vtecklr
Regular Member
Posts: 924
Joined: March 23rd, 2009, 12:10 am
Location: Red Deer, Alberta

Re: Hum, a funny tranny problem

Post by 93vtecklr »

Can you get me cheap smokes? I'll meet you on the other side of the st lawrence.

"my second gear make me loss a big 2-4 second before got in. the 1-3 and 5 gear goes find...and in the morning...the tranny run like a new one, no grinding or hard shift,"

I really don't have a clue what you're asking? Haha you said tranny
Image
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
User avatar
MAPEXMX3
Regular Member
Posts: 33
Joined: April 13th, 2006, 1:03 pm
Location: CANADA/QUEBEC

Re: Hum, a funny tranny problem

Post by MAPEXMX3 »

:wink: ah my dear canadian friend, you guy always make me laught, anyway, thanks but no thanks, i know, the translation not so good, but a, i did my best, :)

I just spoke with one a the guys down mx3 quebec, said it could be the back lash ajustment(bad rebuilt)...so big hourra!!! :| got to pull out that stupid tranny again, a bringht it down to some order shop, hou......rra....
and by the way 93vtecklr, we dont have cheap smoke here in quebec,we got the goooooood stuff, all the cheap smoke are send down to alberta... :lol: just joking

see ya
User avatar
93vtecklr
Regular Member
Posts: 924
Joined: March 23rd, 2009, 12:10 am
Location: Red Deer, Alberta

Re: Hum, a funny tranny problem

Post by 93vtecklr »

Haha, ya some of the guys at work buy the reservation smokes, oddly enough, they're all either french or newfies
Image
1993 Blaze Red SE, 17" blackie's, b+m sts, 45 deg 3" exh pipe/intake tube, K8ZE, aftmkt probe headers, magnaflow hi-cat, all 2.5" piping, magnaflow muffler.
1976 Datsun 620 p/u, full airride, Firestone 2600`s, 16ga fuel cell, Optima yellow top, AZ compressor, custom tubular frame with 9in step notch, 18" 100 spokes
1955 Willys Overland 4x4 P/U, '78 LT1 350 cu.in, fully restored.
kab-rst
Regular Member
Posts: 155
Joined: November 19th, 2007, 12:12 am
Location: quebec

Re: Hum, a funny tranny problem

Post by kab-rst »

MAPEXMX3 wrote:So hy there mx-3 fan,
short story bettre, year a go, swap for a bp for a pro lx (gt) engine,tranny,ecu,the complit swap, first year, tranny what hard to pull in second gear...the last onwer of the pro was a young men with a fast and furiuos attitude, so i fought, i just kick the s**t of the car, the second syncro dead...
so wait to winter (my baby do not ride in snow anymore) take out the tranny...a rebuilter change the syncro. and the gear...
but evrething back on..but now...oh bizzar..when a start evryting run good, after a few klic, the second gear and the fourth starting to get hard to pull in...and after i ride on the higtway,the second gear is totaly not cooperative, and the fourth grinding...
What th f**k happing here, my second gear make me loss a big 2-4 second before got in. the 1-3 and 5 gear goes find...and in the morning...the tranny run like a new one, no grinding or hard shift,
what could it be, the oil..hum a be suprise,it will but afecting all the gear, i thought, the shifter rod,a keep my mx-3 rod..but..a the morning, tranny goes find...
anybody got a clue...
ça peut etre ben des affaires, perso j'irait vers ton kit de clutch aussi
apres qu'il soit chaud/apres avoir peser une coupe de fois sur la clutch, si ton slave peut pas tenir lapression, tu va avoir l'impression que ta pu de clutch, meme si ta pédale reste dur
96 rs-t mx-3, 12.62@114
u have the Zoom Zoom feeling?
Post Reply

Return to “Transmissions”