speedo drive

jon_young · Post by **jon_young** » May 24th, 2009, 10:29 am

can someone tell me if the cable speedo will fit in with the electric one and are the dials different???

also gear selector are the 1.6 ones and the v6 ones the same or not, as everything is almost done on my swap

Ryan · Post by **Ryan** » May 24th, 2009, 1:01 pm

As long as your speedo gear/cable are both digital or both mechanical, they should interchange. The problem you will run into is that the cable will not plug into the back of the cluster. Your cable/sensor and cluster must match.

hgallegos915 · Post by **hgallegos915** » May 25th, 2009, 9:54 pm

speedo cable?isnt it electronic??

get one from a probe gt

jon_young · Post by **jon_young** » June 7th, 2009, 12:55 pm

no its not electric

Ryan · Post by **Ryan** » June 9th, 2009, 8:29 am

No, there are both mechanical and electric speedo cables/clusters. If all the plugs on the back of your cluster are similar (20-ish pin?) then you're digital. If you have a big round one in the centre, its mechanical. I'm not sure if the cable itself in the engine bay is visually different. All I know is my mechanical one is very rigid.

Any G series should be digital. My F5MR is is mechanical, and I'm quite sure somewhere in 1994 they moved over to digital in the 4 cyls (F25MR)...

Nd4SpdSe · Post by **Nd4SpdSe** » June 9th, 2009, 10:26 am

No GS's use a speedo cable, it's all electronic. The only one that uses a speedocable would be the 92-93RS

Ryan · Post by **Ryan** » June 9th, 2009, 11:58 pm

Yeah, I know. All G's are digi. No GS ever came with an F.

But he said its mechanical, so he needs a 92-93 RS cluster.

MX-3.com

speedo drive

speedo drive

Re: speedo drive

Re: speedo drive

Re: speedo drive

Re: speedo drive

Re: speedo drive

Re: speedo drive