Towing / Trailer hitch

General Mazda MX-3 Discussions
Post Reply
Meanie
Regular Member
Posts: 183
Joined: October 17th, 2004, 2:01 am
Location: Michigan

Towing / Trailer hitch

Post by Meanie »

Has anyone ever installed a trailer hitch on the MX3? Since I no longer have a truck, I would like to add a hitch to tow a small trailer every so often for transporting lumber, appliances, tools, etc. and possibly my motorcycle if necessary. I was thinking of purchasing a small utility trailer no larger than a 4 x 8 to use for such tasks.

What trailer hitches are available or recommended for this car? Also, any other input advice is appreciated.

Thanks
User avatar
Ryan
Senior Member
Posts: 7199
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Towing / Trailer hitch

Post by Ryan »

Its not reccommended... but someone has done it(it escapes me who). I believe there is a bar available on Ebay occassionally.

Searched : Tow Hitch

http://www.mx-3.com/phpBB3/viewtopic.ph ... ch#p464740" onclick="window.open(this.href);return false;


Nd4SpdSe wrote:
Mooneggs wrote:
hgallegos915 wrote:I really want that rear towing ball :( i want it BAD!
maybe you can buy it from UHaul or something... like aftermarket... but out of curiousity what would you tow with your mx-3?? :?:
I dont know if they're the same as the Jspec, or if it's OEM, but it looks like they did make an Mx-3-specific hitch a long time ago (this pic is about 4 years old)

Image
(http://www.mx-3.com/phpBB3/viewtopic.ph ... ch#p441408" onclick="window.open(this.href);return false;)

This guy did it. Ugly IMO, but its done
http://www.mx-3.com/phpBB3/viewtopic.ph ... ch#p297806" onclick="window.open(this.href);return false;

Aston Wards wrote:Dunno, but i towed a horsefloat......, and destroyed the Auto tranny! (was only for 10km!) :oops:

it was uh, interesting? trying to stop the thing! :shock:
You do the rest of searching :)
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
fowljesse
Supporting Member
Posts: 5676
Joined: March 17th, 2006, 2:59 pm
Location: portland, OR
Contact:

Re: Towing / Trailer hitch

Post by fowljesse »

I bought a hitch on Ebay used. I like it ALOT. My MagnaFlow exhaust had to be let go from it's rubber hangers while I had it on. With the stiff suspension, upgraded brakes, and strong engine, I could haul stuff, but I've only used it once to put on my bike rack, and haul my tandems. It's easy to put it on, and take it off. The ad said "Mazda tow hitch MX6 MX3".
I would feel comfortable hauling the stuff you mentioned.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: Towing / Trailer hitch

Post by Nd4SpdSe »

I've wanted one for a while now. I've been autocrossing a fair amount of times and I've seen Miata's and Rx7's tow trailers for their racing tires and gear. What I fell in love with is that you can get a tire carries that goes into the hitch. They use it to carry their race tires to the track. I may still get one made, but I'd like to hide the receiver behind the rear plate
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
User avatar
fowljesse
Supporting Member
Posts: 5676
Joined: March 17th, 2006, 2:59 pm
Location: portland, OR
Contact:

Re: Towing / Trailer hitch

Post by fowljesse »

Also, for Auto-X ,you can leave it on for better weight distribution, and to have more weight on the rear wheels without any penalties, or putting your car in a different class.
Mine pushed against the very bottom of the bumper very slightly, but only noticeable if you're on the ground.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Meanie
Regular Member
Posts: 183
Joined: October 17th, 2004, 2:01 am
Location: Michigan

Re: Towing / Trailer hitch

Post by Meanie »

fowljesse wrote:Also, for Auto-X ,you can leave it on for better weight distribution, and to have more weight on the rear wheels without any penalties, or putting your car in a different class.
Mine pushed against the very bottom of the bumper very slightly, but only noticeable if you're on the ground.
Do you remember the name brand of the hitch?

Currently on Ebay there are Curt hitches for the MX3. To my understanding, they are direct fits and take less than 30 minutes to install. I could also buy one from Curt directly, but the cost is a bit more.
User avatar
fowljesse
Supporting Member
Posts: 5676
Joined: March 17th, 2006, 2:59 pm
Location: portland, OR
Contact:

Re: Towing / Trailer hitch

Post by fowljesse »

Mine was used, and doesn't have a name on it. It has only 2 bolts that hold onto the upper part of the tow tabs, and took about 15 minutes to install. There are holes for bolting it to the bottom of my hatch area, but it wasn't necessary for what I'm doing, and I didn't want to drill the holes. I had to cut a small retainer tab off of one of the tow tabs for it to fit flush.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Re: Towing / Trailer hitch

Post by hgallegos915 »

I wanted to make one but nobody ever sent me the diagrams
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
User avatar
Daninski
Supporting Member
Posts: 7055
Joined: June 18th, 2007, 10:51 am
Location: Trenton ON.

Re: Towing / Trailer hitch

Post by Daninski »

Jesse, do up a drawing so we can build one pretty please. Hey how about carbon fiber hitch (ok I just smacked myself). :)
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.

I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
User avatar
fowljesse
Supporting Member
Posts: 5676
Joined: March 17th, 2006, 2:59 pm
Location: portland, OR
Contact:

Re: Towing / Trailer hitch

Post by fowljesse »

:lol: Okay, I'll draw it up, but may need reminding. I'm going to send you templates for the phenos, when I get mine back from Moonman, also.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Post Reply

Return to “General Mazda MX-3”