Car Updates

Manitoba / Saskatchewan Mx-3 owners and surrounding areas
95 rs
Regular Member
Posts: 743
Joined: February 2nd, 2005, 11:11 pm
Location: thompson, manitoba

Post by 95 rs »

ok so my car is pooched for now..... head gasket its blown wide open, ill take it for a 10=15 min drive and the top of the tranny is soaked with coolant... got arp studs nd a headgasket on the way should be here this week so ill have it all done after the long weekend. and i just through my stereo in just before the head gasket blew. 2 10" kicker comp subs in a kicker shotgun box, Rockford amp, alpine deck, type s speakers in the rear got components on the way also for the rear so ill put the type s from the rear up front. ummm ya i donno wht else to say it blows without the car. but as i see it its cheaper walking and saves me cash..... and i got a nice $1500 cheque comming my way tomorrow.... man i love payday... :D
95 rs with custom short ram air, b&m short throw shifter, probe 2.0L header with 2 1/4" exhaust all the way back, catco high flow cat, apc high flow muffler with 4.5" tip, accel 8 mm wires, blaze red, cf altezzas, gun metal 17" mr7s, slotted cross drilled rotors on the way with hawk hps pads, red and white interior, other then that its stock.
User avatar
Vanished
Regular Member
Posts: 1826
Joined: July 4th, 2004, 2:01 am
Location: Saskatoon Canada

Post by Vanished »

Hahah man that blows. Haha.. good one. I hope you get it fixed soon!

As for me, i'll be autocrossing sunday or tuesday, or both! I got my control arm replaced as well as stablizer link kit and tie rod end. No more shuddering! YESsssssss...car is awesome. ALso go the sound system in.
1992 Blaze MX-3 GS *R.I.P.*

1993 Blue 93 SE-ZE

http://www.cardomain.com/ride/2770987/2
95 rs
Regular Member
Posts: 743
Joined: February 2nd, 2005, 11:11 pm
Location: thompson, manitoba

Post by 95 rs »

i finally got my car done this last week and installed the new probe header and i am happy i can drive her again...... 2 months with out driving it was hard but now im back and ya its awesome...... just need to find another amp now.... anyone get a 400 watt amp lyin around theyd sell for dirt cheap to help a guy out?
95 rs with custom short ram air, b&m short throw shifter, probe 2.0L header with 2 1/4" exhaust all the way back, catco high flow cat, apc high flow muffler with 4.5" tip, accel 8 mm wires, blaze red, cf altezzas, gun metal 17" mr7s, slotted cross drilled rotors on the way with hawk hps pads, red and white interior, other then that its stock.
Post Reply

Return to “Manitoba / Saskatchewan Mx-3 Community”