hmm quite interesting...
k8 ecu times
16.08
16.10
klde ecu times
15.5
15.8
16.0 (span out on the tires)
Im still learning on how to launch... its kinda not bad for a ze with the wrong ecu, bad engine mounts, failing alternator , fan wires directly via switch.
the sad part is that nobody wanted to race..i ran against a miata and won by like 3 car lenghts. An acura integra around 4 car lenghts.
A "vtec" civic did not wish to race me, a tiburon was slower than me. Most cars where. Remember we are at 3000 feet or higher.
The only faster cars where camaros , one 13 sec prelude.
Nice run, on the way home my alternator began to fail... millenia alternator time.
I cant wait to get the probinator ecu and my engine mounts, that should bump me to low 15 high 14. Oh and i need tires.. the ones i got are street and worn out btw.. i lost a good half a second spinning out in 1st and second.
Todays results at the track
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Todays results at the track
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Ok i went again today ( sunday) No times on sundays.
IMO i had very nice runs.. no traction. Ill post the video tomorrow.
VS.
Acura integra, i win by 3 car lenghts.
Honda civic non v tech, I win by around hmm 5 car lenghts.
V6 Tiburon , I win by 3 car lenghts.
Cobalt SS , I lost by a car lenght.
Same story.. nobody wanted to race. A white eclipse 2.2 with nitrous didnt wanna race without it. "uh my clutch is slipping"
Focus didnt wanna race, neither did cavaliers.
Sentra type r .. also scared.
Some people came up to me and sayd they were impressed and what i had done to the car.
Ill u tube the video tomorrow.
The night ended like at 11pm when the idler pulley for power steering fell out.
Outside temp 55 degrees and the belt was still spinning water pump sorta. Drove home WITHOUT overheating. I got the pulley at home tho. I may remove power steering. It drives fine without it.
IMO i had very nice runs.. no traction. Ill post the video tomorrow.
VS.
Acura integra, i win by 3 car lenghts.
Honda civic non v tech, I win by around hmm 5 car lenghts.
V6 Tiburon , I win by 3 car lenghts.
Cobalt SS , I lost by a car lenght.
Same story.. nobody wanted to race. A white eclipse 2.2 with nitrous didnt wanna race without it. "uh my clutch is slipping"
Focus didnt wanna race, neither did cavaliers.
Sentra type r .. also scared.
Some people came up to me and sayd they were impressed and what i had done to the car.

Ill u tube the video tomorrow.
The night ended like at 11pm when the idler pulley for power steering fell out.
Outside temp 55 degrees and the belt was still spinning water pump sorta. Drove home WITHOUT overheating. I got the pulley at home tho. I may remove power steering. It drives fine without it.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- mx3autozam
- Senior Member
- Posts: 2950
- Joined: September 24th, 2005, 9:09 pm
- Location: Kitchener
You say thats not too abd for the wrong ecu. ya its not too abd at all. But you can do much better. My best is 14.9 with a k8 ecu and stock intake. NO CAI. I ahve oen now but havn't been back yet.
Figure out how to launch your car and keep tryinga nd you will get some nice times.
John
Figure out how to launch your car and keep tryinga nd you will get some nice times.
John
93 Mazda MX3 KLZE Turbo
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
tires to come soon.. i checked the dyno and im about what an average ze would be with my mods.
162 whp that was with regular gas. This engine needs premium. feels more peppier with premium. Ill change timing belt and tires. TIRES are what mess me up and bad driving. Altitude has some to do with it.
162 whp that was with regular gas. This engine needs premium. feels more peppier with premium. Ill change timing belt and tires. TIRES are what mess me up and bad driving. Altitude has some to do with it.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- XxantwawnxX
- Regular Member
- Posts: 1281
- Joined: January 8th, 2005, 11:08 pm
- Location: Newportnews VA
its not bad considering ur altitude. good times. I beat a cobalt ss in my ZE NA mx3...but i was gutted.

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.