intake question

ccmextreme · Post by **ccmextreme** » October 28th, 2005, 12:16 am

Alright

I got a 95 Mx-3 GS V61.8L AND im trying to make a custom cold air...

Now heres my problem, If i do install one...what do i do with the 3 vaccum hoses that are suppose to go in the air boxes ?

Right now i just installed a cone onto the vaf or wtvr that big plastic thing is called...and wheni remove the vaccum hoses...the car stalls out ?

HELP ?

PATDIESEL · Post by **PATDIESEL** » October 28th, 2005, 12:29 am

They need to be plumbed back into the new cold air intake is the easiest answer. Or you can take the largest one and put a breater filter on the part where the hose comes from (where the "T" fitting is next the valve covers) and then plumb the other two small ones into the intake.

tradske · Post by **tradske** » October 31st, 2005, 1:30 pm

90-93 Integra CAIs can be modified very easily to fit. Email me and I can send you a step by step on the whole process.

jschrauwen · Post by **jschrauwen** » October 31st, 2005, 1:39 pm

A five minute search using the search function produced this.
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
http://www.mx-3.com/phpbb2/viewtopic.ph ... hlight=cai
Enjoy the read.
*John*