My First Drags Times...

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: My First Drags Times...

Post by Nd4SpdSe »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by curtklze:
I know you didnt ask for any help, and I am sorry to offer it if you already know this.<p>I had the exact same times my first time out with my KLZE, what helped me was this, 2.5 inch exhaust with no cat and Hign flow muffler, I also ran with nothing but my VAF, no filter or filter box or lid. Also putting Ice on the intake manifold to cool it down between runs lets you gain some good time.<p>running to red line wont help because you engine cant breath at 7000 RPM because the k8 and small exhaust are choaking off the air flow into and out of the engine.<p>sorry if you already knew this, I hate it when people give me advice on my car when I dont ask for it.<hr></blockquote><p>Not a problem, i kinda figured those were holding me back, good to confirm this technically, i appreciate it!<p>thebonestockkid, i didnt know you had a 2.5, you running a DE or ZE? i though you had the stock 1.8 cause of your IM, but you times didnt make sense, it was too fast for a k8, until i just checked your sig
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
thebonestockkid
Regular Member
Posts: 498
Joined: April 3rd, 2002, 2:01 am
Location: Bolton, Ontario, Canada

Re: My First Drags Times...

Post by thebonestockkid »

its a DE man, thats why I was SLIGHTLY disappointed at my ET lol. sure it was my first time running it, but ah well. as for the IM, im using the 2.5 one also, A-spec made it fit somehow heh. lates
Image'97 Grenada black pearl Acura EL, JDM B18C 98spec ITR Swap. Power in Control full coilovers going in next spring. Not to mention a most unusual whining noise... coming soon.

'92 Intense blue pearl Jeep YJ, OME lift, mudders, fun.

R.I.P.
'93 Clear white GS-DE ~14.648@92.98mph, 2.234 60ft. PARTING OUT PM ME.
Sean Mandell
Regular Member
Posts: 736
Joined: February 8th, 2002, 2:01 am
Location: Toronto

Re: My First Drags Times...

Post by Sean Mandell »

I don't know if it's just me but both your times are
pretty even steven. I alwayz thought trap speeds for the klze would be in the mid to high 90's. :confused2:
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: My First Drags Times...

Post by Nd4SpdSe »

curt explained it best, its my intake and exaust, its restrictive for my engine, its a bigger engine and require more air to come in and out, the higher the rpm's, the more air it needs, but the problem is, my power IS at high rpm, and at those rpm is struggles for air, which actually would explain the feel of lack of power above ~6K. <p>But thebonestockkid has, i belive a proper exaust, however i dont remember the intake he had on it, but it seemed to have evened us out. A proper aspirated KLDE vs a Restrictively Aspirated KLZE, and my restrictions deminished my performance to that close of a KLDE<p>Just wondering, for the guys that actually hit 14's. Do you actually hit 5th gear? I know at the end of the strip for me im inches from redlining on 4th..<p>[ September 14, 2003: Message edited by: Nd4SpdSe ]</p>
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
aaronthehic
Regular Member
Posts: 603
Joined: August 19th, 2002, 2:01 am
Location: Guelph Ontario Canada

Re: My First Drags Times...

Post by aaronthehic »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Nd4SpdSe:
you got pics of them...sounds tempting but im in a temporary financial rutt, and cant afford anything that expensive..BTW, what do you use or dragging, rims wise? I'm guessing drag tires? What do you use on your rears?<p>Also, do you guys actually hit 5th gear when dragging? I get very close to redline in 4th when ending the 1/4 mile<p>[ September 13, 2003: Message edited by: Nd4SpdSe ]<hr></blockquote>
i don't have a digital camera but someday, bmw 14" steels on front and 134" stells with snows on the back, ya i'm half way through 5th it sucks
13.023 @ 105 mph
thebonestockkid
Regular Member
Posts: 498
Joined: April 3rd, 2002, 2:01 am
Location: Bolton, Ontario, Canada

Re: My First Drags Times...

Post by thebonestockkid »

i really only got one run in tho, kinda ****ty for having to drive an hour and half to get to the place lol. hopefully i'll do better in a couple of weeks when i go again.
Image'97 Grenada black pearl Acura EL, JDM B18C 98spec ITR Swap. Power in Control full coilovers going in next spring. Not to mention a most unusual whining noise... coming soon.

'92 Intense blue pearl Jeep YJ, OME lift, mudders, fun.

R.I.P.
'93 Clear white GS-DE ~14.648@92.98mph, 2.234 60ft. PARTING OUT PM ME.
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: My First Drags Times...

Post by Nd4SpdSe »

let me know when you plan to go again, ill definitely be in...i just wanna get my exaust done first<p>Remember when i told you that my reaction time on my last run was 0.6, well i misread the timeslip. All my other runs were on the left side, my last run was on the right, and i read the left side slip by accident. It was happier cause even tho i didnt get a good reaction time, my drag time was faster, which i was really happy about. I notived it when my friend showed me a quick clip of my last race when i went to drop him off at home, the other guy took off first, so i rechecked my slip. I didnt care about the reaction time when i fouhnd out i had a 15.4 instead of a 15.7 :D
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Post Reply

Return to “Drag Strip/Track Racing”