Strut bars
-
- Regular Member
- Posts: 99
- Joined: February 16th, 2004, 2:01 am
- Location: Wi
Strut bars
are strut bars just for show for under the hood? or do they actually have a purpose? what do the bars do to the car?

*Girls can go fast too!*
-
- Junior Member
- Posts: 11
- Joined: March 6th, 2004, 2:01 am
- Location: Starkville, MS, USA
Re: Strut bars
strut bars help strengthen the chassis. When you are taking a corner, you know that feeling like the car is swaying? It is often times the shocks going down and the chassis flexing. The strut tower bar goes over the engine to strengthen the front half of the chassis and the strut bar goes in the trunk to strengthen the rear. It helps prevent flex.
When used in conjuction with good shocks and springs, it makes for a very stiff corner and therefore a tighter corner.
They are a must for autocross, but not really neccessary for drag.
Hope this helps.
When used in conjuction with good shocks and springs, it makes for a very stiff corner and therefore a tighter corner.
They are a must for autocross, but not really neccessary for drag.
Hope this helps.
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: Strut bars
and are nice for show under the hood
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy