just a thought on RWD MX-3
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
just a thought on RWD MX-3
so I ws watching monster garage the other day and it was the one where they had to make an ambulance pop a wheelie.
I was wondering if anyone thinks there could be a way of using a V-drive to convert the MX into RWD. It would have to be more of an L-drive I immagine, and I realize this question is in a vague form but....it's like 4am so BACK OFF!!!!
I was wondering if anyone thinks there could be a way of using a V-drive to convert the MX into RWD. It would have to be more of an L-drive I immagine, and I realize this question is in a vague form but....it's like 4am so BACK OFF!!!!
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Regular Member
- Posts: 31
- Joined: August 4th, 2003, 2:01 am
- Location: Brampton, Ontario, Canada
Re: just a thought on RWD MX-3
I WILL NOT BACK OFF CUZ ITS 5AM HERE! NOW!
but who knows RWD mx is not outta the question, just outta most everyones wallets...

but who knows RWD mx is not outta the question, just outta most everyones wallets...
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: just a thought on RWD MX-3
an l-angle wuld be like, what, 90 degrees or so? that'd be too extreme of a driveshaft angle for it to even spin fast enough to idle.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- Nd4SpdSe
- Senior Member
- Posts: 11213
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: just a thought on RWD MX-3
i guess it depends, just a though, the 4cyl mx-3 uses the same engine as a Miata, which is RWD...unless the engine on the Miata is turned 90* compared to the mx-3's, it should be possible...but a v6 mx-3 on the otherhand, i have no idea
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
Re: just a thought on RWD MX-3
Come on ND4SPDSE-- you have been around the MX-3 & Mazda community long enough to know that he Miata engine IS turned 90* compared to the MX-3.Originally posted by Nd4SpdSe:
unless the engine on the Miata is turned 90* compared to the mx-3's,

-
- Regular Member
- Posts: 73
- Joined: December 2nd, 2003, 2:01 am
- Location: victoria, bc CANADA
Re: just a thought on RWD MX-3
is it possible to throw in a rotary drivetrain. I think the mx3 has a place for driveshaft does it not. This should be possible. Is the rear frame strong enough? What mods would need to be done. I know you would probably need engine,ecu,tranny, rearend, but what else would need to be done. peace
Drive it like it's stolen, cuz it's so funny watching the cops creep up on ya real slow if ya stop, lol.
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: just a thought on RWD MX-3
I don't actually care about making a RWD mx3....that was not the topic really. My question was actually about V-drive application....or L-drive really. It has been answered.
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
- Nd4SpdSe
- Senior Member
- Posts: 11213
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: just a thought on RWD MX-3
Dude, how would i know?...i'm a v6'erOriginally posted by atlantamx3:
Come on ND4SPDSE-- you have been around the MX-3 & Mazda community long enough to know that he Miata engine IS turned 90* compared to the MX-3.Originally posted by Nd4SpdSe:
unless the engine on the Miata is turned 90* compared to the mx-3's,
![]()

1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 73
- Joined: December 2nd, 2003, 2:01 am
- Location: victoria, bc CANADA
Re: just a thought on RWD MX-3
anybody done a rwd conversion, I'm thinking of throwing in a rotary and making rwd w/ rx7 drivetrain, possibly even awd. let me know whatcha know. thanks
Drive it like it's stolen, cuz it's so funny watching the cops creep up on ya real slow if ya stop, lol.
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: just a thought on RWD MX-3
have fun. post pics when you're done.Originally posted by tommygunzit:
anybody done a rwd conversion, I'm thinking of throwing in a rotary and making rwd w/ rx7 drivetrain, possibly even awd. let me know whatcha know. thanks

http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
Re: just a thought on RWD MX-3
I second that. But if you want to get rid of all that money my address is...Originally posted by marshmallow15:
have fun. post pics when you're done.Originally posted by tommygunzit:
anybody done a rwd conversion, I'm thinking of throwing in a rotary and making rwd w/ rx7 drivetrain, possibly even awd. let me know whatcha know. thanks![]()