when searching for KLDE, which year should i be looking

[mx3man83]

I just bought a GS and want to swap the KLDE into it....any specific year i should try to find?? Oh yeah, two more things..those of you that have done the swap, did u get the PGT ecu as well?? Or did u get some sort of piggyback system? Also, did u stick with the stock mx tranny?

[Sonicxtacy02]

93-97 probe/626/mx6 engine will work. you can use your existing tranny/ ECU. If you use your ECU just make sure you buy an engine from a OBD-I model year

[mx3man83]

and i take it that the 93-97 probe/626/mx6 all have the OBD-I(?)?

[dylanmx3]

Nope. Pre-96 had OBDI and 96-97 had OBDII...BTW you've got "93 SOHC" listed...you sporting a four cylinder? If you are you'll definately need the ECU from the donor car...and alot of other bits. Take look at my post regarding the "ODB1 - odb2 swap" yesterday...the pit falls are pretty well laid out.<BR>Dylan

[mx3man83]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by dylanmx3:<BR><STRONG>BTW you've got "93 SOHC" listed...you sporting a four cylinder? If you are you'll definately need the ECU from the donor car...and alot of other bits. <BR>Dylan</STRONG><HR></BLOCKQUOTE><P>uHh dude thanks for the help but if you re-read the post, i said I just bought a GS...not being a **** or anything, just sayin<P><BR>SO i should get a pre 96 engine??<P>So i should get

[aaronthehic]

a pre 96 <P><BR>I like the ze+ ze-ecu it runs alot better and is worth the$$<P><BR>the air meter will have to match what ecu if you know that.

[mx3man83]

change the rear oil seal? You mean on the crank?? Why change it?? And change it to what?

[aaronthehic]

when I installed my ze the oil seal beneath the flywheel leaked oil all over the clutch packs and made the clutch slip .<P>thoes seals like to be wet in oil all the time or they dry out and leak<P>I wish some one told me what I'm telling you , that is a bastard of a job to do for 1 stupid seal

[mx3man83]

Ive been calling around, asking for something between 93-95, and everyone asks what production date mine is? Does that really matter?? I know that i need one with the obd1 ecu, which is(if i remember correctly) 93-96....why do they ask for the production date when i say 94 or 95??? Thanks