Best VAF? Best ECU? for KL-ZE
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Best VAF? Best ECU? for KL-ZE
I looked at my KL-ZE in the warehouse the other day..It said on it 1994. I wanna buy a VAF and an ECU for it. Should I get it from a 94 2.5 Probe, MX-6, Millenia ? Or is there a better year I should get it from?
-
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: Best VAF? Best ECU? for KL-ZE
No one's ever asked this before. 

KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
I found out nevermind. thanks? [img]shrug.gif"%20border="0[/img]
Re: Best VAF? Best ECU? for KL-ZE
Hey I am days away from dropping my engine in and I was wondering which VAF I should use. will the KL08 work
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
I was reading that the check engine light will come on. Read the Swap forum and read what the problem is.
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
I just picked up a 96 Probe GT 5 speed ECU and VAF.. hopefully these will work
Re: Best VAF? Best ECU? for KL-ZE
would a 1993 mx-6 ecu fit into a 1992 mx-3 with a KL-ZE???
IN NEED OF HELP ASAP!!!
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
how can these things be found out
Re: Best VAF? Best ECU? for KL-ZE
How are you going to use a 96 Ford Probes ECU and VAF sensor? - OBDII
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
thats the thing i dont know.. I wanted to know which I should get..
-
- Regular Member
- Posts: 684
- Joined: June 3rd, 2001, 2:01 am
- Location: Babylon, NY, USA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
Can someone please tell me if a 96 Probe GT VAF work with my KL-ZE.. im getting the engine put in tomorrow.. I have to know this ASAP, cuz if it doesn't work i have to return it.
-
- Regular Member
- Posts: 126
- Joined: December 7th, 2001, 2:01 am
- Location: Sacramento, CA
- Contact:
Re: Best VAF? Best ECU? for KL-ZE
I am pretty sure that the 96' setup will not work for you because of OBD-II. Just use your 1.8 ECU and 1.8 VAF. The 1.8 vaf and kl-ze j-spec vaf are the exact same part. If you do use a vaf from a 2.5, use the 2.5 ecu also. I have a kl-ze and I am using my 1.8 ecu and vaf.<P>I found this on probetalk.com just now...<P>Q.<BR>"First off.. I run a 93 PGT.. <BR>I can obtain a 96 ECU for next to nothing.. <BR>Will that work anyways.. Simply because its an OBDII Chip? <BR>If it will, Would it be possible to re-program this chip? <BR>Your response would be appreciated greatly!<P>A.<BR>It won't work - the OBD2 computer is for an OBD2 equipped car and vice versa - you cannot reprogram it with OBD1 code nor, again, vice versa. (imagine trying to install Windows 95 on your old 286 computer)"<p>[ April 12, 2002: Message edited by: 93 mx-3 gs/se ]