MX-3.com

Front right wheel bearing is shot, will I need to take the piece into a shop so they can use a press, or can I get them out using hand tools? Please reply ASAP, I will be doing the replacement tomorrow. It's 108 degrees around here so I don't want to be messing around out in the sun with them if it ...

Matt Maas makes those. He know's his stuff. No way I'd pay that much for them since I really don't care what mine look like, but if you want a good set of turbo pipes that are perdy, buy those.

Becareful, it's not always the igniter that goes out. There is also a coil in there that will fail. Look around in this section (v6 tech/performance) and you can find a post by me that will tell you how to use a klze distributer. You can find those for pretty dang cheap on here and Probetalk since ...

what year mx-3 do you got and what year probe was that diagram made for?

I've got a 93 MX-3, and I have no clue what year the Probe was.




..some things are different in the wiring diagram I found on Grants site. i.e. the second wire (looking from the front of the engine) of the 6pin clip, in ...

I know the HEI mod is old news here, but here is a little bit about using the HEI mod, external coil, and a KLZE distributer.

I did the HEI mod a few weeks ago, which was nice since it helped the sputtering a little bit. I knew it was time to get rid of the internal coil as well, since I still ...

Um racingmazda.com had an SOHC going. I thought I remembered them blowing it up around 180 or 175 whp.

People have different definitions of "blowing up" an engine. If they put a rod through the block or snap it in half, that would tell me that maybe the SOHC may have trouble handling all of that ...

Well, I may be interested in those injectors if I can find out our stock flow rates. Putting in 220cc injectors with a stock ecu would be a very bad idea if the stock flow rates were like 140cc or something puny like that. I had a SOHC way back when I was 17, but I do remember a few things about ...

This is not your typical "I haven't searched, so feed me everything like a baby" question about injectors so hear me out. I currently have a klze MX-3 on a 75 shot of nitrous, and have had Mx-3's for the past 4 years so I know a great deal about k series motors, v6 bodies, and Mx-3s in general. I ...

Break the lugnuts on the front tires loose
Remove hood (optional, just makes life easier if you do)
Wedge something on the backside of one of the rear tires
Jack the car up
Pull the front wheels off
Drain fluids
Disconnect radiator hoses from the engine (one on driverside, one on passenger side ...

Considering he's getting it done for $1,200, I'm sure it's not going to be a very good job. Get the KLZE if you can get ahold of some MIllenia S injectors, wideband o2 (such as AEM), and a Megasquirt kit (bulk buy on Probetalk coming very soon). Right there alone, just in fuel mods, is going to be ...

Clicked on the fuse box pic but nothing came up. Can someone just look under their hood and scope out their fuse box cover?

I seem to have lost the lid to my fuse box (in the engine bay) and I keep popping a fuse. It is the one that is on the driverside, closest to the firewall. I believe it's a 40 amp. It's directly to the right of a big black piece that appears to be some sort of relay. I will put up a little diagram I ...

I like the bumper. The only one out there I like better is the Drift bumper. I may pick one of those up this summer if I decide to turbo. A FMIC would look funny with this bumper, since without mesh the front bumper support is exposed.

Sure are. Zex 75 shot.

Dirty, but she does her job.