Hey!
I need some major help with deciding on an exhaust setup. I know for sure I'm getting the headers from psituning.ca and I'm importing the muffler that PosterT makes for the MX-3. I do not want my exhaust to be ridiculously loud. And I don't want it to sound like a ricer car. I need to get ...
Search found 16 matches
- October 4th, 2005, 1:44 pm
- Forum: V6 Technical/Performance
- Topic: Need major help with glasspacks and resonators
- Replies: 12
- Views: 748
- October 2nd, 2005, 2:36 pm
- Forum: V6 Technical/Performance
- Topic: PosterT Sport Rear Silencer
- Replies: 2
- Views: 174
PosterT Sport Rear Silencer
Hey,
I dunno if you guys have seen this muffler, but I'm importing a PosterT M500095 Sport Rear Silencer. I wanna get teh best performance out of my exhaust without making it loud. I've decided to get a get a glasspack because I was told that would help cut down on the sound. Now I just need to know ...
I dunno if you guys have seen this muffler, but I'm importing a PosterT M500095 Sport Rear Silencer. I wanna get teh best performance out of my exhaust without making it loud. I've decided to get a get a glasspack because I was told that would help cut down on the sound. Now I just need to know ...
- September 30th, 2005, 2:10 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: Is a flywheel worth the investment?
- Replies: 12
- Views: 852
Is a flywheel worth the investment?
Hey,
I'm planning on getting an ACT Z62-HDSS Clutch Kit for my MX-3. I was wondering if a new Flywheel is worth the investment because they're not cheap at all. I looked briefly and it was more expensive than the clutch kit! Would the stock flywheel be okay? If not, which flywheel do you recomend ...
I'm planning on getting an ACT Z62-HDSS Clutch Kit for my MX-3. I was wondering if a new Flywheel is worth the investment because they're not cheap at all. I looked briefly and it was more expensive than the clutch kit! Would the stock flywheel be okay? If not, which flywheel do you recomend ...
- September 29th, 2005, 12:28 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: Does Brembo make crossdrilled & slotted rotors???
- Replies: 13
- Views: 665
Does Brembo make crossdrilled & slotted rotors???
Hey,
Does Brembo make a Crossdrilled & Slotted rotor for the front and back for a 93 MX3 w/ rear disk? I can find drilled for the front, and slotted for the back, but I can't find Crossdrilled & Slotted rotors. If they do, does anyone have the part number from Brembo?
Thanks!,
Randy
Does Brembo make a Crossdrilled & Slotted rotor for the front and back for a 93 MX3 w/ rear disk? I can find drilled for the front, and slotted for the back, but I can't find Crossdrilled & Slotted rotors. If they do, does anyone have the part number from Brembo?
Thanks!,
Randy
- September 26th, 2005, 7:11 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: Good Disk/Pad combination???
- Replies: 3
- Views: 338
Good Disk/Pad combination???
Hello,
I just want to know what would be the best disk and pad combination. I have a 93' MX3 that's about to get a KLZE swap and I want to redo the brakes and suspension and exhaust while I'm at it. I was told to get drilled and slotted, but I have no idea waht I'm looking for. I thought it'd be ...
I just want to know what would be the best disk and pad combination. I have a 93' MX3 that's about to get a KLZE swap and I want to redo the brakes and suspension and exhaust while I'm at it. I was told to get drilled and slotted, but I have no idea waht I'm looking for. I thought it'd be ...
- July 30th, 2005, 12:08 am
- Forum: V6 Technical/Performance
- Topic: Where do I get parts!?!
- Replies: 5
- Views: 543
Where do I get parts!?!
I'm sure you guys have this problem all the time. Where can I find parts at a good price for a '93 MX-3 GS? Here are some things I really need. And I don't wanna get any ofthis from a junk/car salvage yard.
Spark Plug Wire Set (V6)
Windshield Wiper Arms
Washer Fluid Nozzle Heads
Any replacement ...
Spark Plug Wire Set (V6)
Windshield Wiper Arms
Washer Fluid Nozzle Heads
Any replacement ...
- July 8th, 2005, 9:14 am
- Forum: V6 Technical/Performance
- Topic: Shop Manual
- Replies: 13
- Views: 1157
Shop Manual
Got another question for yas! Where can I find a shop manual like the one on mx-3.com? I want a hard copy of it before I go through with the KLZE swap.
Thanks
Randy
Thanks
Randy
- July 8th, 2005, 9:12 am
- Forum: V6 Technical/Performance
- Topic: Quiet mufflers?
- Replies: 14
- Views: 1467
Quiet mufflers?
Hey guys,
I was wanting to know what are the quietest mufflers you can buy for this car? Most people are into making their car real loud and low, but I want mine to have the high performance flow like any other, but a very very very quiet sound. What's out there?
Thanks
Randy
I was wanting to know what are the quietest mufflers you can buy for this car? Most people are into making their car real loud and low, but I want mine to have the high performance flow like any other, but a very very very quiet sound. What's out there?
Thanks
Randy
- April 5th, 2005, 7:00 pm
- Forum: V6 Technical/Performance
- Topic: KLZE Turb/Supercharger
- Replies: 3
- Views: 340
KLZE Turb/Supercharger
Hey guys, I got another question about the KLZE swap. Everyone knows that before a Turbo or Supercharger can be installed on an engine, there must be many modifications. Like Pistons, rods, stronger camshaft, etc... Since the KLZE is already a "performance" engine, does anything need to be changed ...
- March 18th, 2005, 1:08 pm
- Forum: V6 Technical/Performance
- Topic: KLZE headers questions
- Replies: 2
- Views: 308
KLZE headers questions
Heyguys,
One more question about the KLZE swap and I should be on my way. What headers do you reccomend that I will not have do any kind of O2 sensor modifications? I am trying as hard as possible to stear clear of any ecu modifications, except the one I have to swap out to run the KLZE properly. So ...
One more question about the KLZE swap and I should be on my way. What headers do you reccomend that I will not have do any kind of O2 sensor modifications? I am trying as hard as possible to stear clear of any ecu modifications, except the one I have to swap out to run the KLZE properly. So ...
- March 17th, 2005, 9:36 pm
- Forum: V6 Technical/Performance
- Topic: KLZE supplier and performance upgrades questions
- Replies: 2
- Views: 302
KLZE supplier and performance upgrades questions
Hey guys. I'm on the verge of doing my KLZE upgrade in my '93 MX-3 GS. But, I have a few questions first.
1) Has anyone purchassed from Japan Star Motor and are they a good supplier?
2) Will the HKS cold air intake made for the 1.8L V6 in the GS work okay with the KLZE?
3) What headers do you ...
1) Has anyone purchassed from Japan Star Motor and are they a good supplier?
2) Will the HKS cold air intake made for the 1.8L V6 in the GS work okay with the KLZE?
3) What headers do you ...
- March 2nd, 2005, 10:34 pm
- Forum: V6 Technical/Performance
- Topic: Gutless GS !!
- Replies: 12
- Views: 570
Head Gasket dude!! I have a 93 GS and I have the same problem. The only difference is that mine has the 5 speed manual tranny in it. But if you feel a large lack of power, especially uphil, and you burn oil with a start after it's been sitting, it's 10:1 your head gasket. You're better off replacing ...
- February 28th, 2005, 10:55 pm
- Forum: V6 Technical/Performance
- Topic: Opinions on the KLZE swap?
- Replies: 2
- Views: 346
Opinions on the KLZE swap?
Okay guys.... I need some opinions! Here's the story: I have a pretty nice 1993 Mazda MX-3 GS. As you all know that's the model with the 1.8L V6. I'd say about a year ago I noticed the car was burning oil very fast. I've got opinions and suggestions and everything else from anyone who'd help and ...
- February 28th, 2005, 8:11 pm
- Forum: V6 Technical/Performance
- Topic: KLZE Suspension
- Replies: 6
- Views: 311
KLZE Suspension
Quick question guys. I'm taking a 1993 Mazda MX-3 GS with the 1.8L V6 and dropping a KLZE engine in it. Does the stock front suspension need to be changed at all?
-Randy
-Randy
- October 15th, 2004, 8:24 am
- Forum: V6 Technical/Performance
- Topic: Liquid Glass cooling system sealer
- Replies: 1
- Views: 141
Liquid Glass cooling system sealer
Hey guys,
Thanks blueskyguy007, your information has really helped. But, I could not seem to locate that Liquid Glass anywhere. I tried searching for it over the net, but couldn't seem to find anything but Liquid Glass car cleaner. Does anyone know where I can locatre this Liquid Glass cooling ...
Thanks blueskyguy007, your information has really helped. But, I could not seem to locate that Liquid Glass anywhere. I tried searching for it over the net, but couldn't seem to find anything but Liquid Glass car cleaner. Does anyone know where I can locatre this Liquid Glass cooling ...