MX-3.com

btw, oscar..... none of this is personal against you! I realize this isn't your full-time profession, and your not the one who makes these products so I don't want you to think I'm attacking you on this! But you may want to look into the company your getting to do the work as there were a few who ...

Here's the best pics I could do at that time with the camera I had. This is the day I received the hood. And let me say it was packed properly and the box marked accordingly so there were definately no shipping issues.

Here's the bubbles in one section. Not as quality of a pic as the other one ...

http://memimage.cardomain.net/member_images/12/web/408000-408999/408020_29_full.jpg


I got the inverted CF hood in the group buy and it was FILLED with air bubbles just like this, and the fit was horrible! I was pretty discouraged 'cause it was 600+ and we waited almost a year for it and it ...

I read this and really kinda laughed. First of all if you look at the wire sizing, the power wire and the ground wire are both the same size, which means you won't have a current restriction from just your ground wire. Secondly, by splicing into the wire halfway, your still only flowing as much ...

If your stuck on red, I like the candy apple idea. I've seen that teg you posted many times. Looks like ryan's teg. In pictures it looks ok. In person I think the paint looks like s---. You know you can go to crappy tire and get the spray on "flake" look for $10, so having it on your car at all ...

I had the EXACT same problem. I had been running a ZE Disty with an MSD digital 6, baster 2 coil and HEI module. Started having the exact same symptoms after 2 weeks or so. 4100rpm and it would just start spitting and sputtering. After a few attempts it would jerk and stall. Turned out it was the ...

Well, took the car for a rip up the road and back at about 8pm last night. Kinda funny actually. Had no headlights in it, not even any wiring for the headlights. Figured "Ah, I live way out in the middle of nowheres it'll be fine with just streetlights" Sure enough after turning around and almost ...

I've got a template all drawn up for the website, just needed content and that takes forever to write up, and I realized I was way too busy to finish it up.

I figure my rubbing may have something to do with the 215/35r18 tires on there.

And to answer your earlier question, I just put them in the rear not the front. Front fit perfect. I brought in a rotor to a machine shop and had them machine me spacers based off the mounting surface on the rotor to ...

checked all the fuses in both the interior and under-hood fuse box. I've got the starter out and bringing into a starter shop to get rebuilt just in case the problem is in the starter itself. I just find it weird that the fan turns on the second I turn the key to start :s

I've got a good one here. Took the car out of storage yesterday so I could start working on everything I need to do for this upcomming season. Start it up today and she fired right up. Idled like a champ. After I let it warm up for a few I touched the gas and the idle got higher. And every time I'd ...

had the same problem. I had a choice of running thinner tires or spacers. I chose the spacers with extended wheel studs.

loosely translated it says "Mazda Mx3 Front optics, is built on the base of Hella elements. Complete set of two headlights." 500EUR is roughly $700CAD. Ouch.

So my garage free's up this Friday, and I'm pulling the MX-3 in first thing friday night. Going to finally try and figure out what my problem was from last year. I had it running, but at 4,000+ rpm it would just missfire and spit and sputter. I think it's somewhere in the wiring for the ZE Disty ...

Most of ya from the maritimes know me already, but for the formality of it...... :p

Mike from NB
93 GS
Way too many mods for me to list, check out my cardomain site if ya want 'em.
Goal for this year is to take the thing out after speedsport, and put 'er away after SCN. Maybe a COMPLETE summer ...