MX-3.com

hey is the 94 mx3 and the 96 mx3 the same o2 sensors

obd-2 mx-3's have different o2 sensors than an obd-1 mx-3 so a 96 is indeed different than the 94.

Which do the OBD2's use on the V6s - 3 wire? or 4

96-97 O2 pn's. http://www.mx-3.com/phpBB3/viewtopic.php?f=23&t=65706" onclick="window.open(this.href);return false; They are 4 wire

ahhh crap lol my o2 sensors r new on my obd2 so since im going obd1 i gotta get new ones boooooo anyone know the best ones to go with the ze for obd1

Go to RockAuto.com and order the Denso's

k kool thanks

you do not need to go obd1 if you are installing a klze in a obd2 mx-3, you can run it properly minus the vris points with a mx-6 vaf.

I'm already driving a obd2 ze I bought another mx3 with no rust on it but it's obd1

while we're on the topic of o2's, i'm in need of 2 for my 92 v6, so far the cheapest ive found is 145 each(not universal) any one else seen a better deal for proper o2's for our cars?

there on rockauto.com for $40 each good ones to

or go directly to the denso online site, I can get both delivered for cheaper than 1 of them through my local parts stores.

atomic froster wrote:while we're on the topic of o2's, i'm in need of 2 for my 92 v6, so far the cheapest ive found is 145 each(not universal) any one else seen a better deal for proper o2's for our cars?

Ya I got my two from RockAuto for like $115 delivered for both. The OEM Denso ones. I put the info in the FAX section. OH and by the way you don't need the lower, they're just to monitor the upper O2 sensors.