MX-3.com

ok so heres whats going on...

my disty went out on my 94 mx3 klze so i bought a blaster ss external coil and the 4 pin hei module with a klze 7 nipple disty... i wiring everything up and it still wont start? i have no spark... so i doublecheck and every seems ok... try to start it again, no go... so i take out every thing and rewire it all with the hei module well grounded and everything looks good but still no start... every thing turns but i have no spark? could it be my hei module is burnt or what could it be?

Would this have anything to do with the cam sensor in the disty? The 94 needs it dosen't it?

Daninski wrote:Would this have anything to do with the cam sensor in the disty? The 94 needs it dosen't it?

i have no idea... but i wanna get it running...
this is the diagram i used...

Go here, http://www.clubprotege.com/wil/howto/hei/index.htm" onclick="window.open(this.href);return false;

i already looked at this and the wire colors are not the same at all...

please there must be someone that did this mod on there 94 mx3? please tell me if the diagram is ok?

i really need to get my car running...

The wires on the 3-pin plug are in a different order in 94's, but the colours are the same. So just look at the wire colour in the diagram and not their positions.

John your using a French schematic, it's an Engish built car that's your problem. lol I just added this to the FAQ does it compare at all to your wiring. viewtopic.php?f=23&t=69006" onclick="window.open(this.href);return false;

i feel like an idiot now... my problem was my fuel injector fuse was jumped :S sry guys...

i changed the fuse and it started right up but now it wont start again :S the starter dosent even turn? im charging my battery right now and will go see later if it starts...

thx guys

Holy HEI diagrams! Might as well post up mine too!



And for those that are French-impared

so i changed my starter again and it still would not start it would turn but no start so i chnged my plugs that were about 1 month ould and it started perfect no the car runs ok but i cant wait to have my ms...

thx for all the help guys