Aftermarket Turbo Manifold
Posted: May 20th, 2006, 7:09 pm
Is there any aftermarket turbo manifolds for the BP?
besides the ETD Racing one which costs $500.
besides the ETD Racing one which costs $500.
MX-3.com
The Worlds First and Largest Mazda MX-3 Forums
http://www.mx-3.com/phpbb3/
Aftermarket Turbo Manifold
Page 1 of 1
Posted: May 20th, 2006, 9:36 pm
does this answer ur ? yes its an mx-3
Posted: May 21st, 2006, 4:59 pm
isn't that just a custom made manifold or is that what yer saying get one built.
Posted: May 21st, 2006, 6:37 pm
thats racing mazda prototype Turbo EM
Posted: May 21st, 2006, 7:34 pm
They are one available i think but if you got the money have a custom done.
Posted: May 21st, 2006, 8:27 pm
ya ill contact racing mazda i guess but im thinking that the manifold is gonna be just as expensive as the ETD Racing Manifold if not more...but i guess will soon see
Posted: May 21st, 2006, 10:07 pm
U wouldn't be able to use ur stock TB its using a mustang TB with a adator.
Sorry i type in IM and explain the wrong thing. corrected my statement above .
The T EM is a prototype for the FWD BP but it was one made with power in mind. it will not fit with ur PS or AC in place there will be one made with PS & AC in mind but not in the mean time. it comes with a T3/T4 flange none will come with the IHI flange.
Sorry i type in IM and explain the wrong thing. corrected my statement above .
The T EM is a prototype for the FWD BP but it was one made with power in mind. it will not fit with ur PS or AC in place there will be one made with PS & AC in mind but not in the mean time. it comes with a T3/T4 flange none will come with the IHI flange.
Posted: May 21st, 2006, 11:01 pm
I don't know if i'm lost or not but wasn't this supposed to be about a turbo manifold 
ETD's manifold is pretty good man and "the price is right" for what it is good for. Putting a T3/T4 on an equal length turbo manifold is efficiency at its best. A lot of manifolds are gonna cost around 500 bucks my friend. Turboing stuff isn't cheap unless you get junkyard turbos and get someone to do a quick cheap job on a turbo manifold which might be a little fun but might be more problems up ahead.
ETD's manifold is pretty good man and "the price is right" for what it is good for. Putting a T3/T4 on an equal length turbo manifold is efficiency at its best. A lot of manifolds are gonna cost around 500 bucks my friend. Turboing stuff isn't cheap unless you get junkyard turbos and get someone to do a quick cheap job on a turbo manifold which might be a little fun but might be more problems up ahead.
Posted: May 22nd, 2006, 12:00 am
ya i was talking turbo manifold not intake manifold ahaahh thanx fo that i guess
Posted: May 22nd, 2006, 12:10 am
thanks for pointing that out MechaManZero didn't notice i did that i correct my post and i must have been tired.
The Turbo EM is a prototype for the FWD BP but it was one made with power in mind. it will not fit with ur PS or AC in place there will be one made with PS & AC in mind but not in the mean time. it comes with a T3/T4 flange none will come with the IHI flange. if u plan on upgrading ur going to have to ditch the factory turbo and upgrade it.
can someone post a site to check out there Turbo manifolds.
The Turbo EM is a prototype for the FWD BP but it was one made with power in mind. it will not fit with ur PS or AC in place there will be one made with PS & AC in mind but not in the mean time. it comes with a T3/T4 flange none will come with the IHI flange. if u plan on upgrading ur going to have to ditch the factory turbo and upgrade it.
can someone post a site to check out there Turbo manifolds.