Page 1 of 1
Yet another question from a newbie spark plug gap?
Posted: November 29th, 2004, 6:19 pm
by Nukewind
So, earlier today I was out trying to change out my spark plugs. But I ran in to a snag, when I couldnt find what the spark plug gap was sposed to be. I checked the door, and under the hood on the stickers. But I couldnt find it anywhere.. I have been known to be kinda blind.. but I was out there for 20 min looking for the dam thing
thanks again, you guys help a lot.
Re: Yet another question from a newbie spark plug gap?
Posted: November 29th, 2004, 6:28 pm
by Grants
Mine are at 1.1mm which is what was recommended.
Re: Yet another question from a newbie spark plug gap?
Posted: November 29th, 2004, 6:50 pm
by perhapsadingo8yerbaby
Yeah, MX-3 shop manual says 1.0 - 1.1mm, .040 - .043in
Re: Yet another question from a newbie spark plug gap?
Posted: November 29th, 2004, 9:01 pm
by lakersfan1
Pretty much every time I go get plugs, they always tell me the plugs are pre-gapped. They usually are dialed in at .044, which is close enough to spec.
Re: Yet another question from a newbie spark plug gap?
Posted: November 30th, 2004, 8:56 pm
by RoundTop
platinum plugs are almost always pre-gapped. Only the standard plugs are really that adjustable.