MX-3.com

if your pedal pressure is still firm, you don't need to bleed the brakes. a good idea, maybe. necessary, no.

Originally posted by OsoSlo z28:
those half-box looking things keep the vibration down and reduce noise. i didn't put one side on one time and drove around the block. i came back within 5min and put them back on.

where do the half box thingy's go? in with the spacers or ?
much appreciated guys.

Originally posted by tommygunzit:

Originally posted by OsoSlo z28:
those half-box looking things keep the vibration down and reduce noise. i didn't put one side on one time and drove around the block. i came back within 5min and put them back on.

where do the half box thingy's go? in with the spacers or ?
much appreciated guys.

Put everything back exactly the way it was before you took the old pads out.

aww man, the thing is that they fell out before I even got a look. I took the rotor off, heard something fall and there they were, do they go behind the outside pad or ?
thanks

did they fall off both sides? if not, just go look at the other side.

it's really hard to explain where they go. they fit on the "tip" of the caliper. there's two for each caliper.