Donate to the MX-3.com Forums
View unanswered posts | View active topics It is currently December 05 2019, 9:07 PM



This topic is locked, you cannot edit posts or make further replies.  [ 30 posts ]  Go to page 1, 2  Next
 [GB] Custom Made Lambo Door Hinges 
Author Message
Regular Member

Joined: June 01 2006, 12:12 AM
Posts: 504
Location: Fergus, Ontario
Post [GB] Custom Made Lambo Door Hinges
That's right. Custom made. Professionally done. Lambo hinges for us!

I have setup a Group buy threw Xtreme-Doors.com to create us custom hinges. They have offered us three different choices.

------------------------------------------------------------------------------------
Choice One - 60 Degree Bolt On - $500Canadian
    2 sets of Xtreme-Doors Hinges
    2 600lb shocks
    All necessary mounting hardware.
------------------------------------------------------------------------------------
Choice Two - 90 Degree Bolt On $600Canadian
    2 sets of Xtreme-Doors Hinges
    4 150lb Shocks
    All necessary mounting hardware.
------------------------------------------------------------------------------------
Choice Three - 60 or 90 Degree Bolt On, Motorized - $1200Canadian

    2 sets of Xtreme-Doors Hinges
    2 150lb Shocks
    All necessary mounting hardware.
    2 110lbs Linear Actuators with 550lb Static Load
    Display (controls movement)
    Central Control unit
    Wire Harness
    Instructions

------------------------------------------------------------------------------------
Additional Information
All of our kits come Bright Zinc, and Electroless Nickel Plated, for a great show appearance and corrosion resistance. We utilize shocks with our kit that have been specifically designed for this. As well thre will be a 5% donation to Mx-3.com which will be paid to me and I will donate it on your behalf
------------------------------------------------------------------------------------
Terms And Conditions
There will be a $200 Deposit needed on these, before the hinges go into production. This deposit is refundable it is to see who is truely commited. The Deposit will be given to me and I will then inform Xtreme-Doors of how many we have. The rest of the payment must be made before these hinges are shipped. Buyer pays shipping as always. Paypal and Credit Cards are accepted. We need 10 people for this buy to be a go. I am hoping to have this go into production before christmas and for that to happen deposits would need to be in before Dec. 21st.
------------------------------------------------------------------------------------
Pictures
ImageImage


Last edited by Matt on November 21 2006, 4:24 PM, edited 5 times in total.



November 20 2006, 11:07 PM
Profile
Regular Member

Joined: June 01 2006, 12:12 AM
Posts: 504
Location: Fergus, Ontario
Post 
Current members who want into this group buy.

Choice One
o0loopy0o
Joey's mx
rece
------------------------------------------------------------------------------------------
Choice Two
cjthor
guido101
ovendenk
inthemaking
hotsiit

------------------------------------------------------------------------------------------
Choice Three
Matt



Also, because these are custom made hinges and Xtreme-doors doesnt already have any, we dont have a picture of them on a vehicle yet. I will work to get some installed on mine before the GB is done so everyone can see.


Last edited by Matt on December 13 2006, 6:03 PM, edited 7 times in total.



November 20 2006, 11:27 PM
Profile
Regular Member

Joined: June 01 2006, 12:12 AM
Posts: 504
Location: Fergus, Ontario
Post 
Update

I have been talking with X-D and I have been told that the turnaround time is 2 weeks from the time the deposits are in. We need 6 people with deposits in to make this group buy begin.


November 21 2006, 11:01 PM
Profile
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post Update 1/26/07
Ok lets get this going!!!!

For all of you that have been waiting thanks for your patience! If you want in I need.....

A PM Titled****Lambo Hing group buy deposit
Name
phone number
physical and shipping address if different
what hinge set you want
If paying deposit by money order or paypal

*** DEPOSIT IS 200CAD***
IF you pay by paypal you are required to pay the transaction Fee. I feel this is only fair as I am not making money on this buy. CANADIANs there is also a conversion fee.


The list I have...
Mazda02
oOloopyOo
Spotted
inthemaking
magiccowinuse
onderground_mx3
ovendenk
hotsit
cduBBz'915
reece
tempus


*****DEPOSIT DUE BY FEB 9TH!!!*****
PM ME ASAP!!!!

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


Last edited by cjthor on January 31 2007, 6:57 PM, edited 1 time in total.



January 27 2007, 3:27 AM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
CANADIANS!!! Update from Kyle at xtreme doors....
We actually prefer not to use paypal as the fees are ridiculous for larger sums of money. Money Orders or Personal Checks are fine. Personal Checks do have a clearing period of 10 business days but that will not be a problem. So we would prefer money orders as this is a custom group buy and will take time to get the kits made, and this can sometimes create problems with paypal as they often want tracking numbers ASAP since we are a business.

Let me know if this is ok. Canadian members can send email money transfers as well using http://www.certapay.com or through online banking. If they would like to do this, I can give them my email address where the money transfers can be sent.

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


January 29 2007, 4:38 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post PICS PICS!!!
Hey all,
Kyle sent me these pics to show off!
Image

Image

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


January 30 2007, 2:11 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
OKAY>>>> Ive had three people cancel already....and have only heard from...
Spotted
cduBBz'915
onderground_mx3
mazda20
oOloopyOo

...If I dont get the others info (need ten) by the fifth...this group buy will be cancelled.

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


January 31 2007, 7:01 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
This is from Kyle at xtreme doors....

Hey,

This is Kyle Wesley from Xtreme-Doors. To anyone that has concerns about the group buy or would like to talk to me personally, please feel free to call me at 1-519-432-1768. This number is working again as we were having some technical difficulties with it, but it is now working again. I will be happy to answer any questions you may have. If you get the answering machine, please leave a message with your name and number, and please state that you are calling about the MX-3 Group Buy.

As for our Facility, our Machine shop is located in Wallaceburg, but we are in the process of moving into a new larger Facility in London, ON. Once we are moved into our London Facility, I welcome anyone to stop by to see the new Facility and to see some of our products as well as to talk with us.

Again, please do not hesitate to give me a call as I will be more than happy to answer any questions you may have. Or, if you prefer email, you can email me directly at kwesley@xtreme-doors.com . I also would like to take this chance to apologize for the delays, but now that Jarid is running it, things should move along a lot smoother.

Thanks again,
Kyle Wesley
Xtreme-Doors

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 01 2007, 1:03 AM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
Canadians!!! Kyle from Xtreme doors is getting me a paypal address.

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


Last edited by cjthor on February 06 2007, 12:23 AM, edited 1 time in total.



February 04 2007, 3:42 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
If you have questions for xtreme post em here!!
http://www.mx-3.com/phpbb2/viewtopic.php?t=57143

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 04 2007, 7:13 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post update 2/9!!
Here are the deposits I have
1. Mazda 20 90 degree kit
2. Hotsit 90 degree kit
3. reece 90 degree kit
4. ovendenk 90 degree kit
5 .magiccowinuse 90 degree kit
6. spotted 90 degree kit
7. oOloopyOo 60 degree kit
8. 93_4banger 60 degree kit

If youre not on the list TODAY...youre not in on the buy. PM ME TODAY!!!!

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 06 2007, 12:25 AM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
fyi the money orfer for the us people should be in kyles hands today!

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 21 2007, 4:51 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
There seems to be some issues with the type of money order I sent in to Kyle. I am going to go tomorrow on my lunch to a company of kyle's choosing to get this squared away. This delay is MY fault as I figured a Money order from a bank would be fine. It would have taken a few extra days to get an international money order in CAD funds so I sent one in US funds...this turned out to be unacceptable. Here is the message I got from Kyle...
We did in fact receive the check, however this method is really not acceptable. We have been trying to get these funds for some time now so that we could begin this group buy and provide our products. We were told on the 19th that you had already gotten a Western Union money order for the amount of $860. The three day wait would have been delay enough but instead we received a personal money order (what happened to the western union one that was already made?) and now its going to take AT THE SHORTEST 15 business days. I'm sorry but this in unacceptable as we have been waiting since the 6th of this month. We were also told that we would be receiving $1000 Canadian Funds but instead the money order comes out to $976.00. The money order should have been made out in Canadian funds. And seeing that the Western Union Money order was actually never made, I had messaged you saying that a US Postal money order was the way to go, but instead I received a Bank Personal Money Order. Jarid we would suggest that you cancel this money order and have you either go to a location (Western Union or Moneygram) and do the Direct Transfer, preferably the Moneygram as this will then be available to us in 10 minutes of you sending the money. You can go and cancel the money order as there is no point in waiting till March 14th for the money, as the Canadian Customers have had their deposits in since the beginning of the month, and now everyone is going to have to wait till this last set of deposits is received and cleared.

If this was going to be a problem, it would have worked better just to have the US customers send us the money either via paypal or directly to us. We are offering these kits at a discount, and we are now losing money as well as being delayed. We want to keep all of the customers happy, but suspect when they hear that the kits are not going to be made until sometime after March 14th we will be having a lot of complaints. I will be posting in whatever section I can in posts regarding the group buy to inform people of the delay until we can get this sorted out.

So please, have the money order cancelled and send payment via a US Postal International Money Order in Canadian Funds, or by Moneygram in Canadian Funds. We want to get this group buy going, but at this rate, people will not have their kits until sometime in April (Work does not begin until desposits have cleared which is March 14th, then 2 weeks to make the prototype that brings us to March 28th, then one more week to get the production kits ready for shipping which brings us to April 4th)

Kyle Wesley
Xtreme-Doors

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 22 2007, 12:17 AM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
FINAL LIST OF MEMBERS IN ON THE BUY!!!!

oOloopyOo 60 degree kit
Mazda20 90 degree kit
Hotsit 90 degree kit
Reece 90 degree kit
ovendenk 90 degree kit
magiccowinuse 90 degree kit
spotted 90 degree kit
93 4banger 60 degree kit
onderground_mx3 90 degreee kit
Tempus 90 degree kit

IF THIS IS WRONG LET ME KNOW!!!! FINAL LIST IS GOING TO KYLE TOMORROW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


February 23 2007, 3:40 PM
Profile ICQ YIM WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Post 
I emailed Kyle for an update and got this response today as to when I would get the first kit to try out.

Hey Jarid,

It will be going out this week, we are just waiting for the revised parts and as soon as they come in, the kit will be shipping out. Because of the shape of the fender, we needed a unique kit to clear the fender and it took quite the engineering. I apologize for the delays, but we wanted to make sure this kit works flawlessly.

Kyle

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


March 19 2007, 2:39 PM
Profile ICQ YIM WWW
Display posts from previous:  Sort by  
This topic is locked, you cannot edit posts or make further replies.   [ 30 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.