Mx-3 E-brake and/or Shifter Leather/Vinyl/CF Boots GB
This is a Group Buy for a custom tailored Mazda Mx-3 E-brake boot and/or a Shifter Boot.
E-brake boot is specifically tailored to fit with SRD Billet E-brake handlesLink Here
. Usually the whole factory plastic trim over a metal E-brake is removed to install an SRD Billet E-brake Handle. This leaves it unfinished with bare metal exposed. E-brake leather boot will solve that problem. Boot comes with all the holes punched such that it fits onto a centre console to be secured from inside with the screws that hold the rubber surround around the E-brake hole. To secure it onto an E-brake you use one zip-tie. The result looks factory spec. See Picture with an SRD E-brake handle:
A Shifter Boot is an OEM pattern and also comes with all the holes punched to fit with your shifter surround. The top hole is made the same diameter as factory boot, but could be requested to be smaller/bigger. You could also choose to zip-tie it from the inside around the shifter. Here is a picture with a Momo shifter knob:
Both boots could be made from any colour leather with any colour stitching. Stitching facing you is a French seam. All stitching is foam reinforced just like OEM does, so it will not fall apart. Here are sample leather colours, others could be requested:
Also could be made from Vinyl of any colour. Specific patterns of Ostrige skin, Crocodile skin, etc could be requested on an individual basis.
Also, could be made from a Carbon Fibre pattern Vinyl of highest quality. Looks awesome to complement those CF bits on your car's interior/exterior. Here are the only CF Vinyl colours available:
So, we need ten (10) people to receive the pricing we want.
Pricing is as follows (any colour/any stitching):
E-brake boot OR Shifter boot: Cad$55.00
Both Leather E-barke/Shifter boots: Cad$95.00
-Carbon Fibre Vinyl
Boots have the same pricing structure as do Leather items due to material cost.
E-brake boot OR Shifter boot: Cad$40.00
Both Vinyl E-brake/ Shifter boots: Cad$70.00
-All pricing includes the donation to Mx-3.com as well as an equal donation to Mx-West.com This way you are also supporting the Mx-3 community. NO profit will be made my me, the organizer. I did my own before and thought they looked good. My upholstery guy had the pattern saved up, so why not.
-Shipping is NOT included and estimated to be at Cad$7.00 to Canada or US$7.00 to Continental USA as it could be shipped in an envelope.
-Payment could be done via Paypal (email@example.com
)(if paying with visa, add appropriate fees), Email Money Transfer (for Canadians) or a certified International Money Order/Bank Draft drawn on a reputable financial institution.
All the work is done by Perry at Buckets and Benches
. He mainly works on a lot of Hot Rods as well as Antique vehicles, but has done my full interior as well (see on Mx-west website). A few awards are under his belt as well.
Any questions, please email me at: firstname.lastname@example.org
<small>[ December 12, 2004, 07:48 PM: Message edited by: JDM ]</small>