MX-3.com
http://www.mx-3.com/phpBB3/

Installing an amp and sub
http://www.mx-3.com/phpBB3/viewtopic.php?f=9&t=75513
Page 1 of 1

Author:  ginja117 [ October 05 2010, 7:19 PM ]
Post subject:  Installing an amp and sub

hi guys just wanted to know if someone could help me out a little bit as im new to having my az-3.
I want to install a sub and an amp but im having a problem locating a place to feed the power cable through the firewall?
i dont really want to do any drilling and would prefer using an existing hole. any help or anyone who knows where to locate a whole that would suit?

Author:  RS_OBD'oh_2 [ October 05 2010, 7:24 PM ]
Post subject:  Re: Installing an amp and sub

there are several holes to choose from. Get a flashlight. They will probably have a rubber insert.

Author:  ginja117 [ October 05 2010, 7:45 PM ]
Post subject:  Re: Installing an amp and sub

could you tell me where these holes might be ive looked for ages all i can find is solid wall

Author:  RS_OBD'oh_2 [ October 05 2010, 8:18 PM ]
Post subject:  Re: Installing an amp and sub

there is one left hand side, past the diagnostics port. There is another one close to the throttle body.

Lay down by on the floor and pull the carpet back a bit from the fire wall. You should see a few plugs.

Author:  ginja117 [ October 05 2010, 8:43 PM ]
Post subject:  Re: Installing an amp and sub

ok thanks

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/