MX-3.com
http://www.mx-3.com/phpBB3/

high pass filters??
http://www.mx-3.com/phpBB3/viewtopic.php?f=8&t=76628
Page 1 of 1

Author:  jamesmx3 [ February 20 2011, 12:29 PM ]
Post subject:  high pass filters??

ok, I have a little project for college, I need to produce a High Pass filter with the -3dB point at 10kHz, which i've done, however the roll off has to be -12dBs/octave. I dont know how to get the roll off from -3dBs to -12dBs?

I was hoping that somebody here in the Stereo section would be able to advise me! :D

Author:  PATDIESEL [ February 20 2011, 10:58 PM ]
Post subject:  Re: high pass filters??

Geez, there is only one member on here that I can think of that might be able to answer your ?... and I cannot remember his screen name. However, he used to be on here alot mroe often and is a MX-3 stereo badass. So you might see if you can find out who has posted the most in this section over the years. IIRC he lives/d in Mississippi or Louisianna or somewhere over there.

Author:  Ryan [ February 21 2011, 2:03 AM ]
Post subject:  Re: high pass filters??

*chew

& maybe

Carolina Cartel


Or the Google Machine.

Author:  CarolinaCartel [ February 21 2011, 9:15 PM ]
Post subject:  Re: high pass filters??

Thanks for thinking I could answer this question. But I never used a passive crossover network. I only use active crossovers. I can guide you to site where someone maybe able to answer it. http://www.diymobileaudio.com/forum/

Author:  neuspeedescort [ February 22 2011, 2:13 AM ]
Post subject:  Re: high pass filters??

^ bingo! i know a lot also but man when you get all that technical stuff its a foreign language to me. that is a lot more math and science then i can calculate.


NEUMAN

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/